Rotary Dryer for Fine Sawdust Thermal Drying 50 Tpd
Product Spotlights
2.Customizable mineral powder drying line
3.Easy installation & maintenance
4.Global mining project compatible
5.Uniform final moisture control
6.No over-drying mineral powder
7.Adjustable drying temperature
8.Consistent dried powder quality
9.Fine mineral powder drying protection
Product Introduction
This 50 TPD rotary dryer for fine sawdust thermal drying is a professional continuous drying equipment tailored for small and medium-sized biomass processing scenarios. It adopts a single-cylinder rotary structure specially optimized for fine sawdust, with a daily processing capacity of 50 tons of raw fine sawdust. It can efficiently reduce the moisture content of fine sawdust from 40%~60% to below 12%, and the dried finished sawdust can be directly used for biomass fuel, particle processing and other scenarios. It is the core drying equipment to support the stable operation of small and medium-sized sawdust processing plants.
Working Principle
The inclined single-cylinder body is driven by a stable transmission system to rotate at a low and uniform speed. The wet fine sawdust enters the cylinder from the feeding end, and is continuously lifted and scattered by the built-in special lifting plates as the cylinder rotates, forming a uniform material curtain in the cylinder. The high-temperature hot air fully contacts with the scattered fine sawdust for rapid heat and mass transfer, taking away the moisture in the material. After the material moves to the discharging end along the inclined cylinder, the dried fine sawdust finished product is stably output, completing the continuous thermal drying process.
Core Features
This 50 TPD fine sawdust rotary dryer has multiple targeted advantages. The specially designed lifting plate structure effectively avoids the material sticking and agglomeration problems during fine sawdust drying, and the drying efficiency is significantly improved. The optimized hot air distribution system makes the heat utilization rate reach more than 60%, and the energy consumption is low. The operation is stable and reliable, and it can support 24-hour continuous operation with low failure rate. It can be matched with a variety of clean heat sources such as biomass hot blast stoves, with strong adaptability.
Technical Specifications
| Product Specs (m) | Capacity (T/H) | Main Motor Power (kW) | Main Motor Model | Main Gearbox Model | Ratio |
| φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-1 | - |
| φ1.5×12m | 3.3 - 4.9 | 10 | Y160L-6B3 | JZQ500-III-2F | - |
| φ1.5×15m | 4 - 6 | 18.5 | Y200L-6 | JZQ500-III-2F | - |
| φ1.8×12m | 4 - 6 | 11 | Y200L-6 | ZQ50-16II-2 | 16.46 |
| φ2.2×12m | 7 - 12 | 18.5 | Y160L-6 | JZQ650-III | 31.5 |
| φ2.2×14m | 7 - 12 | 18.5 | Y160L-6 | JZQ750-III | 31.5 |
| φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-III | 31.5 |
| φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-III | 31.5 |
| φ2.4×18m | 10 - 13 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ2.4×20m | 10 - 14 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-1 | 41.52 |
| φ3×25m | 32 - 36 | 75 | YR280M-4 | ZL100-16-1 | 41.52 |
Send Inquiry to This Supplier
You May Also Like
-
Rotary Dryer for Softwood Chips Thermal Process 100 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Industrial Wood Waste Drying 250 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Sawdust Burner Fuel Processing 40 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Clean Wood Chips Drying 150 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Mixed Sawdust Recycling 70 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Wood Chips Gasifier System 180 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Tree Bark Thermal Drying 60 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Wood Shavings Bedding Drying 50 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Dry Leaves Pellet Production 30 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Dry Leaves Pellet Production 30 TpdNegotiableMOQ: 1 Set


