Home > Products > Pressure Transimtter > tuning fork level switch for solid, vibrating rod level switch
tuning fork level switch for solid, vibrating rod level switch
- 10000 Piece / Pieces per Month
- qingdao
Product Details
Place of Origin: | Shandong, China | Brand Name: | SICO | Model Number: | SC-5006 |
Product Description
Title goes here.
Specifications:
Tuning Fork Level Switch
Properties:
For cement, metallurgy , coal , feed, grain, steel, power plants , sewage treatment, food and beverage, pharmaceutical and other lines Industry, especially in the conductive material , material properties ( state , humidity , dielectric constant , density, etc. ) often change , safety requirements
Higher operating conditions can be well used , can be used for good mobility solid materials , liquid level monitoring of the material in the cement silo , powder
Dusty warehouse, ash silo , tank , tanks, fermentation tanks , etc. level monitoring has been widely used. This product reliability, maintenance-free, spirit
High sensitivity , easy to put into operation without the need for calibration .
Title goes here.
The main technical indicators:
fork length : 100mm ~ 1600mm ( extended if necessary ) ;
Power supply : DC24V or AC220V 50/60Hz;
fork work ( medium ) temperature:
Common type : -20 ~ 80 °C
Medium temperature : -20 ~ 130 °C
High temperature : -20 ~ 220 °C
Ambient temperature : -20 ~ 70 °C;
Working pressure : ≤ 2.5MPa;
Medium density : ≥ 0.7g/cm3 ( liquid ),> 0.1g / cm3 ( solid ) ;
Title goes here.
Output: relay switch ( DPDT DPDT) ( Contact capacity : 5A, 220VAC or 24VDC, 5A)
Power consumption : 1.5W (AC220V power supply ), 0.25W (DC24V power supply ) ;
Installation: threaded connection, flange connection ( can be user- customized ) ;
Electrical connection : M20 × 1.5; 3/4NPT
Housing protection : IP65;
fork material: 316 stainless steel
Explosion-proof mark : Exd Ⅱ CT4, Exia Ⅱ CT6.
Title goes here.
Works:
Tuning Fork Level Switch is a new level switch . It is the use of a tuning fork vibration theory designed and manufactured .
It is in the tuning fork level switch sensor bar base, driven by a tuning fork piezoelectric wafer sticks, and a piezoelectric wafer acceptance by another vibration signals , the vibration signal to be recycled , and the sensor bar to resonate . When the material in contact with the sensor bar , the vibration signal becomes smaller until it stops resonance, the control circuit will output electrical contact signal . Rod sensitivity due to induction from the front to the rear turn weakened the natural principle , so when material inside the tank around with buckets stacked up , touching sensor bar stand < back > or when nesting , will not generate an error signal .
Simply put, the piezoelectric crystal tuning fork excitation produces mechanical vibrations which has a certain frequency and amplitude . When the tuning fork is liquid or solid immersion , the tuning fork vibration frequency and amplitude will change. This frequency change detected by the electronic circuit and outputting a switch .
scope and characteristics:
Tuning Fork Level Switch is a new level switch . Suitable for almost all liquid media , but also suitable for measuring free-flowing medium-density solid powder or granules. As the tuning fork level switch basically no moving parts , mechanical wear comparison , it is therefore no maintenance and adjustment, easy to use.
In addition, the level switch to new technologies and the use of foreign imported chips, has a long life , stable performance, safe and reliable , and adaptable ( different electrical parameters measured medium density shall not affect the measurement ) , without adjustment ( regardless what the media do not require on-site measurement calibration ) and freedom from maintenance , which is widely used in metallurgy , building materials , chemical industry, light industry, food and other industries in the level of process control .
Benefits:
Versatility : can be applied to various conductive and non-conductive media measurement , such as liquid , viscous , granules, powders
Fly ash : can be anti-adhesion : the use of patented anti-adhesion circuit can eliminate the adhesion of the material generated false signals .
Detachable probe : no cables between the controller and the probe connected to the controller can be removed at any time replacement repair , no shadow
Rang out materials: resistant to high temperature : Suitable for -40 °C to 220 °C working environment.
Output Type : A DPDT relay output , while a status light to display the output state , and 0 to 30 seconds delay function.
Title goes here.
If you need any products or have any problems please contact me.
Contact Us
- Qingdao SICO Electrical Equipment Co., Ltd.
- Contact nameAmy YIN
- Phone86-532-83860752
- AddressRoom 2004, Block B HuaRun Building, No.6 shandong Road,Shinan District Qingdao,Shandong
- Level Measuring
- HPT604-BS Submersible Fuel Level Pressure Transmitter With Magnetic Suction End Cap
- Wate well level transducer WH311
- 80GHz mmWave Radar Level Sensor
- HART Protocol Threaded Pressure Transmitter
- Water Level Sensor Float Switch
- Water Level Sensor Float Switch
- Rotary Paddle Sensor
- RF Admittance Level Sensor for Solid Granule
- Rf Admittance Type Level Switch
- Vibrating Fork Switch
- 200mm Fork Level Switch For Solids
Popular Searches
Recommended Products
- Bimetal thermometer with radially fixed thread electrical contact,electric contact 316L stainless steel 1.6 precision electric contact thermometer
- Stable measurement, anti-corrosion joints, full range, special material PVC diaphragm pressure gauge 2.5 accuracy 100mm, PVC diaphragm pressure gauge accuracy 1.6FS full range bottom connection 100mm, anti-corrosion joint
- All stainless steel inductive electric contact diaphragm pressure gauge 4-20mA
- Hastelloy Monel Bile Material PTFE Diaphragm Pressure Gauge SUS316L isolation diaphragm 1.6 level precision diaphragm pressure gauge SUS316L PTFE sprayed isolation diaphragm 1.6 level precision diaphragm pressure gauge Titanium isolation diaphragm 1.6 lev
- Double tube differential pressure gauge accuracy 1.6FS
- Double bourden tubes 250Kpa differential pressure gauge axial connection all stainless steel embedded differential pressure gauge 63mm
- Radial mounting YXZ-100H- liquid filled chuck pointer display transmitter
- 100Kpa absolute pressure gauge 1.6 accuracy 150mm,All stainless steel with stable accuracy
- Electrical contact 4~20mA, 25Kpa diaphragm point contact differential pressure pressure gauge 1.6 accuracy 100mm dial
- 100MM 100Kpa 5 times overpressure, absolute pressure pressure gauge, 1.6F.S.
- PP diaphragm pressure gauge, plastic diaphragm pressure gauge
- NPT1/2 100mm electric contact pressure gauge axial back connection type with flange edge pressure gauges
Find Similar Products By Category
- Measurement & Analysis Instruments > Level Measuring Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Amy YIN
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-