IEC60065 Figure 4 Test Hook
IEC60065 Figure 4 Test Hook
1. Introduction:
The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied to do the protection test against electric shock. During the test, the encolsure should have sufficient strength to withstand the damage of external forces and prevent electric shock damage, the hazard live parts shall not become accessible. The test request a directed outwards force of 20N should be applied to all points for 10s.
2. Specification:
Length |
180mm |
Width |
8mm |
Length of hook |
5mm |
Thickness |
1mm |
Material |
SUS304 |
Send Inquiry to This Supplier
You May Also Like
-
PA140 UL1278 Test Probe for Film Coated WireUS$ 60 - 400MOQ: 1 Piece
-
PA130A UL Accessibility Test Probe for Uninsulated Live PartUS$ 60 - 400MOQ: 1 Piece
-
UL Articulate Finger Probe with Web StopUS$ 60 - 400MOQ: 1 Piece
-
UL60950 Wedge Probe With CNAS Calibrated CertificateUS$ 60 - 1000MOQ: 1 Piece
-
IEC60335-2-11 Test Probe for Measuring Surface TemperaturesUS$ 60 - 400MOQ: 1 Piece
-
IEC 60065 Telecom Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-9 Test Hammer for Fragmentation Test of GlassUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 9 Test Plug for Antenna Coaxial SocketUS$ 60 - 400MOQ: 1 Piece
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece