PG-PA145 UL982 Test Rod Probe
PG-PA145 UL982 Test Rod Probe
1. Introduction:
The UL test rod probe is designed according to the standard of UL982 fig. 58.6, UL1278 Fig. 8.2, UL398 fig. 8.2 (PA170B), UL507 (PA170D) and UL749 fig.2. It's used for testing enamel coated wires.
2. Specification:
Radius of Rod |
Φ6.4mm |
Length of rod |
101.6mm |
Material |
Nylon and stainless steel |
Standard |
UL982 fig. 58.6, UL1278 Fig. 8.2, UL398 fig. 8.2 (PA170B), UL507 (PA170D) and UL749 fig.2 |
3. Picture:

Send Inquiry to This Supplier
You May Also Like
-
IEC60335-2-11 Test Probe for Measuring Surface TemperaturesUS$ 60 - 400MOQ: 1 Piece
-
IEC 60065 Telecom Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-9 Test Hammer for Fragmentation Test of GlassUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 9 Test Plug for Antenna Coaxial SocketUS$ 60 - 400MOQ: 1 Piece
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece