Interlock Concealment Test Probe IEC60335-2-25 Fig 101
Interlock Concealment Test Probe IEC60335-2-25 Fig 101
1. Introduction:
The interlock concealment test probe is designed according to IEC60335-2-25 clause 22.105 and figure 101, it is applied to microwave oven.
2. Specification:
Diameter of test rod |
Φ3mm |
Diameter of handle |
Φ10mm |
Length of rod |
100mm |
Standard |
IEC60335-2-25 |
3. Picture:

Send Inquiry to This Supplier
You May Also Like
-
UL60950 Wedge Probe With CNAS Calibrated CertificateUS$ 60 - 1000MOQ: 1 Piece
-
IEC60335-2-11 Test Probe for Measuring Surface TemperaturesUS$ 60 - 400MOQ: 1 Piece
-
IEC 60065 Telecom Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-9 Test Hammer for Fragmentation Test of GlassUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 9 Test Plug for Antenna Coaxial SocketUS$ 60 - 400MOQ: 1 Piece
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece