UL Articulate Finger Probe with Web Stop
UL Articulate Finger Probe with Web Stop
1. Introduction:
Articulate probe with web stop is designed according to IEC62368 figure V.1, meet the requirements of UL507 figure 6.5 (PA100A), UL1017 figure 2, UL1062 figure 1.2, UL1310 figure 14.2, UL982 figure 7.1, UL474 figure 5.1, UL6500 figure 14, UL60065 figure 14, UL1082 figure 7.2 and UL1278 figure 8.3. Palm simulator and restricted joint movement simulates human finger movement. It’s made of nylon. Bell-Core accessory available. The handle is made of nylon. The finger is made of stainless steel.
2. Specification:
Test finger length |
234mm |
The bending part length |
30/30/40mm |
Reference standards |
UL507,UL982,UL1278,UL1062,UL1310,UL474,UL60065 |
3. Picture:

Send Inquiry to This Supplier
You May Also Like
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe C Used for IP3X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe D Used for IP4X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 5 50mm Test SphereUS$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 6 Test Probe 2 With 12.5mm SphereUS$ 150 - 400MOQ: 1 Piece