Contact Platform Support
Help CenterIEC60950 Hardened Steel Pin
Related Products
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece -
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece
Hardened Steel Pin (Scratch Resistance Pin)
Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements.
The hardened steel pin should work with abration reistance tester. When performing the scratch test, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a plane perpendicular to the edge of the conductor. The steel pin should be properly loaded so that the hardened steel pin can apply a force of 10N ± 0.5N along its axial direction. The pin can equip with 20N weights to reach 30N load.
Parameters:
Pin Tip |
40°Conical sharp |
Tip circumference radius |
0.25mm±0.02mm |
Weight |
10±0.5N |
Material |
Hardened steel |
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Test Probe C Used for IP3X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe D Used for IP4X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 5 50mm Test SphereUS$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 6 Test Probe 2 With 12.5mm SphereUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Figure 7 Rigid Finger Probe for Test Probe 11US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Finger Test Probe Figure 8 Test Probe 12US$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 9 Short Pin Test Probe 13 With CNAS Calibration CertificateUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 10 Test Probe 14US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 11 Test Probe 17US$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 12 Small Child Finger Probe Test Probe 18US$ 60 - 200MOQ: 1 Piece
