PA130A UL Accessibility Test Probe for Uninsulated Live Part
PA140 UL1278 Test Probe for Film Coated Wire
1. Introduction:
UL accessiliby test probe for uninsulated live part is designed according to UL507 figure 9.1 (PA135A) and UL1278 figure 8.1 (PA130A). The handle is made by nylon and tip is made by stainless steel.
2. Specification:
Rigid finger length |
101.6mm (4 inch) |
Rigid finger diameter |
Φ12.7mm (1/2 inch) |
Head length |
14.3mm (9/16 inch) |
Head radius |
R4.8mm (3/16 inch) |
Tail diameter |
191.mm (3/4 inch) |
3. Picture:

Send Inquiry to This Supplier
You May Also Like
-
IEC60065 Figure 9 Test Plug for Antenna Coaxial SocketUS$ 60 - 400MOQ: 1 Piece
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe C Used for IP3X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe D Used for IP4X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 5 50mm Test SphereUS$ 60 - 200MOQ: 1 Piece