IEC60065 Figure 9 Test Plug for Antenna Coaxial Socket
Test plug for Antenna Coaxial Socket
1. Introduction
The test plug is designed according to IEC60065 figure 9, it is applied to test the antenna coaxial socket of live parts, and it should endure the mechanical strength during the endurance test, impact test, torque test and etc.
2. Specification
● Length j: 43±0.4mm
● Length g: 40±0.4mm
● Depth d: 9.1mm
● Depth e: 7.112mm
● Depth f: 0.8±0.4mm
● Outer diameter h: 12±0.4mm
● Outer diameter a: 9.576mm
● Outer diameter b: 8.05mm
● Shaft diameter c: 2.438mm
● Radius K: 0.3mm
● Hole Diameter: 1.5mm
● Material: steel
● Standard: IEC60065-2005 figure 9, GB8898-2011 figure 9
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe C Used for IP3X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe D Used for IP4X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 5 50mm Test SphereUS$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 6 Test Probe 2 With 12.5mm SphereUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Figure 7 Rigid Finger Probe for Test Probe 11US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Finger Test Probe Figure 8 Test Probe 12US$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 9 Short Pin Test Probe 13 With CNAS Calibration CertificateUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 10 Test Probe 14US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 11 Test Probe 17US$ 60 - 400MOQ: 1 Piece