IEC 60065 Telecom Test Probe
IEC 60065 Telecom test probe
1. Standards
This telecom test probe is designed according to the standard of IEC60950, IEC60065, IEC60695.
2. Application
It is used to check for limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfied basic standard for telecom product safety.
Technical parameter
Test probe diameter |
12mm |
Test probe length |
80mm |
Dam-board diameter |
50mm |
Material |
nylon and stainless steel |
Reference |
IEC60950, IEC60065,IEC60695 |
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC60335 Finger Nail Probe With 50N Thruster and CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Test Probe A Used for IP1X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe C Used for IP3X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Test Probe D Used for IP4X TestingUS$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 5 50mm Test SphereUS$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 6 Test Probe 2 With 12.5mm SphereUS$ 150 - 400MOQ: 1 Piece
-
IEC61032 Figure 7 Rigid Finger Probe for Test Probe 11US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Finger Test Probe Figure 8 Test Probe 12US$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 9 Short Pin Test Probe 13 With CNAS Calibration CertificateUS$ 60 - 400MOQ: 1 Piece