IEC60884-1 1N & 20N Test Probes for Socket-outlet No-accessibility of Live Parts Test Gauges Through Shutters
IEC60884-1 1N & 20N Test Probes for socket-outlet no-accessibility of live parts test gauges through shutters
1. Introduction:
The probes are designed according to IEC60884-1 figure 9 and figure 10. 20N test probe is for checking non-accessibility live part through shutters, 1N test probe is for checking non-accessibility live part through shutters and live parts of socket-outlets with increased protection.
2. Specification:
20N Push force |
Rigid steel wire |
Diameter: 3+0.03mm, length: 80±0.5mm |
Tip of rigid steel wire |
R0.2+0.05 |
|
1N Push Force |
Rigid steel wire |
Diameter: 1+0.015mm, length: 80±0.5mm |
Tip of rigid steel wire |
R0.05 |
Send Inquiry to This Supplier
You May Also Like
-
UL Articulate Finger Probe with Web StopUS$ 60 - 400MOQ: 1 Piece
-
UL60950 Wedge Probe With CNAS Calibrated CertificateUS$ 60 - 1000MOQ: 1 Piece
-
IEC60335-2-11 Test Probe for Measuring Surface TemperaturesUS$ 60 - 400MOQ: 1 Piece
-
IEC 60065 Telecom Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-9 Test Hammer for Fragmentation Test of GlassUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 9 Test Plug for Antenna Coaxial SocketUS$ 60 - 400MOQ: 1 Piece
-
IEC60950 Hardened Steel PinUS$ 60 - 400MOQ: 1 Piece
-
45V Control Panel for Accessability IP Test ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC60598-1 Figure 29 Test Chain With a Resistance of 2.5Ω/mUS$ 100 - 800MOQ: 1 Piece
-
IEC61032 Jointed Finger Probe for IP2X Testing With CNAS Calibration CertificateUS$ 150 - 400MOQ: 1 Piece