Home > Products > Temperature controller > Temperature Controller
Temperature Controller
- 10000 Piece / Pieces per Month
- Shanghai
- Credit Card
Product Details
Place of Origin: | Jiangsu, China | Model Number: | D10 |
Product Description
Specifications
Temperature ControllerProduct Size:7x3.5x7.5cm
Bore size:70x29mm
High quality and best price
Temperature Controller
Main Function
Temperature display, temperature controlling(refrigeration/heat mode can be set),compressor start delay protection, temperature sensor error alarm, one external alarm input, password, C/F unit change.
Technique Index
1,Temperature display range: -50~150°C(The resolution is 0.1°C)
-58~302°F(The resolution is 0.1°F)
2,Power supply: AC 220V±10% or AC 380V±10% 50Hz (Refer to the wiring diagram)
3,Operating environment: temperature -10°C~50°C, humidity≤85%
4,Relay contact capability: 20A/250VAC (pure resistive load)
5,Temperature sensor: NTC R25=5kΩ, B (25/50) =3470K
Operating Guide
1, Meaning of the index lights on the panel
Index light | Name | Light | Flash |
| Temp setting | In the state of temp setting | - |
| Refrigeration | Refrigerating | Ready to refrigerate, in the state of compressor start delay protection |
| Heat | Heating | Ready to heat, in the state of compressor start delay protection |
| - | - | - |
| - | - | - |
| Alarm | - | Alarm state |
2,Meaning of the LED display
The LED usually shows temperature, if it shows “SHr”, it means the temperature sensor is short, and “OPE” means the temperature sensor is open. The temperature and the alarm code (Axx) will show alternately when in the alarm state. The code is showing below:
Code | Meaning | Explanation |
A11 | External alarm | Alarm from external alarm signal, refer to the internal parameter code “F50” |
A21 | Temperature sensor error | Open or short(showing “OPE” or “SHr”) |
3,Set temperature
Press the key “S” for at least 2 seconds, then enter the state of temperature setting, the LED displays the setting temperature, then using “5” key or “6” key can change the parameter(the key “5” adds 0.1°C, the key “6” minuses 0.1°C, press and hold it over 0.5 seconds can add or minus rapidly). After setting, press “S” again, then exit the state of parameter setting. Pressing the key “M” in the setting process means cancel and exit, but the setting value will not be saved.
4,Refrigerate (or heat) forcibly
When displaying current temperature, the temperature is between “setting temperature - temperature difference” and “setting temperature + temperature difference”, the system may or not refrigerate, you press the key “5” and hold it for 5 seconds, the controller will enter the refrigeration state forcibly when in the refrigeration mode, and stop refrigeration when the temperature is below “setting temperature – temperature difference”; the controller will enter the heat state forcibly when in the heat state, and stop heating when the temperature is above “setting temperature + temperature difference”.
Contact Us
- Suzhou Chuangtai Electronics Co., Ltd.
- Contact nameAndy Ting
- Phone86-512-53111981
- AddressNo. 38, Gugang Road, Taicang
Infrared Thermometer | New Products | NTC Senor | Protector |
Tempaerature Controller | Temperature controller | Temperature&Humidity Recorder | Water Heater Controller |
- Level Measuring
- HPT604-BS Submersible Fuel Level Pressure Transmitter With Magnetic Suction End Cap
- Wate well level transducer WH311
- 80GHz mmWave Radar Level Sensor
- HART Protocol Threaded Pressure Transmitter
- Water Level Sensor Float Switch
- Water Level Sensor Float Switch
- Rotary Paddle Sensor
- RF Admittance Level Sensor for Solid Granule
- Rf Admittance Type Level Switch
- Vibrating Fork Switch
- 200mm Fork Level Switch For Solids
Popular Searches
Recommended Products
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- IEC 62368-1 Figure 49 Aluminium Foil with J type thermocouple
- IEC62368-1 Figure 48 Aluminium Ring with K type thermocouple
- IEC 62368-1 Figure 47 Steel Disc for temperature rise test
- ISO20957-1 Figure 1 Test Finger Φ9.5mm
- Eliwell refrigeration thermostat ID 985 S/E/CK freezer controller ID 985LX
- Eliwell refrigeration thermostat ID PLUS 961 freezer controller
- Eliwell refrigeration thermostat EW PLUS 961 freezer controller EQ17DI0XB4780
Find Similar Products By Category
- Measurement & Analysis Instruments > Level Measuring Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Andy Ting
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-