IEC 61032 Test Probe C With 2.5mm Rod
1. Introduction:
Test probe C (test rod) Designed according to IEC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc. Test probe C is intended to verify the protection against to foreign object with diameter 2.5mm or greater, and protection against to hazardous parts with person’s tool.
2. Specification
Length of test rod |
100mm |
Diameter of test rod |
2.5mm+0.05 |
Diameter of stop sphere |
35mm |
Diameter of handle |
10mm |
Length of handle |
100mm |
Thruster (optional) |
3N ±10% |
Test IP grade |
IP3X |
Material |
insulating material (handle and baffle), metal (test sphere) |
Send Inquiry to This Supplier
You May Also Like
-
IEC 60950 Figure 2C Blunt ProbeUS$ 90 - 200MOQ: 1 Piece
-
IEC60335-2-14 Test Finger Probe With 125mm Stop FaceUS$ 175 - 500MOQ: 1 Piece
-
IEC60335-1 Fingernail Test Probe With 50N ThrusterUS$ 250 - 500MOQ: 1 Piece
-
IEC60065 Test HookUS$ 60 - 500MOQ: 1 Piece
-
IEC 60065 Test Probe KitsUS$ 60 - 500MOQ: 1 Piece
-
IEC 60335-2-24 Scratch Test PinUS$ 60 - 500MOQ: 1 Piece
-
IEC60335-2-24 Test Sphere With 75mm DiameterUS$ 60 - 500MOQ: 1 Piece
-
IEC60335-2-80 Figure 102 Fan Test PinUS$ 60 - 500MOQ: 1 Piece
-
IEC60601-1 Test Probe Kits Includes Jointed Finger Probe Test Probe 13, Test Hook and Ball Pressure Test ApparatusUS$ 60 - 500MOQ: 1 Piece
-
IEC60884-1 Test Probes for Socket-outlet No-accessibility of Live Parts Test Gauges Through ShuttersUS$ 60 - 500MOQ: 1 Piece