Contact Platform Support
Help CenterRotary Dryer for WPC (wood Plastic Composite) Sawdust Drying 120 Tpd
Product Spotlights
2.Customizable mineral powder drying line
3.Easy installation & maintenance
4.Global mining project compatible
5.Uniform final moisture control
6.No over-drying mineral powder
7.Adjustable drying temperature
8.Consistent dried powder quality
9.Fine mineral powder drying protection
Related Products
-
Rotary Dryer for WPC (wood Plastic Composite) Sawdust Drying 120 TpdNegotiableMOQ: 1 Set -
Rotary Dryer for Biomass Boiler Bark Drying 220 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Horse Bedding Wood Shavings Drying 80 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Pyrolytic Oil Leaf Biomass Drying 55 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Pellet Plant Bamboo Shavings Drying 115 TpdNegotiableMOQ: 1 Set
Product Introduction
This 120 tpd rotary dryer for WPC sawdust drying is a professional large-capacity continuous drying equipment tailored for wood-plastic composite material production pre-treatment scenarios. It adopts a low-fragmentation, constant-moisture and non-pollution structure adapted to the characteristics of strict moisture control, no impurity pollution and uniform particle size of raw sawdust for WPC production, with a daily processing capacity of 120 tons of wet WPC-dedicated sawdust. It can reduce the moisture content of raw materials from 52%~66% to the optimal 6%~9% required for subsequent WPC extrusion granulation at one time, and the dried sawdust can be directly and stably fed into the next-stage WPC mixing and extrusion system. It is the core pre-drying equipment to ensure the high surface smoothness, no bubbling and stable mechanical strength of finished WPC products.
Working Principle
The obliquely installed heavy-duty multi-cylinder insulation main body is driven by a high-torque stable transmission system to rotate at a uniform low speed. The wet WPC-dedicated sawdust raw materials are fed into the inner cylinder, and the granular materials are continuously lifted and scattered by the built-in low-fragmentation grading lifting plates as the cylinder rotates, fully contacting with the clean hot air flow without any harmful impurities. The free moisture in the sawdust is precisely and evenly evaporated through the multi-stage independent constant temperature zones, and the dried sawdust that meets the WPC production feeding standards is stably discharged from the discharging end, completing the 120-ton daily continuous drying process.
Core Features
This 120 tpd model has multiple targeted advantages for WPC sawdust drying. The high-precision constant-moisture control system ensures that the moisture deviation of finished sawdust is ≤±0.6%, which completely avoids the bubbling and deformation defects of WPC products during extrusion, and the finished product qualification rate is increased by more than 18%. The low-fragmentation operation design effectively controls the particle size distribution of sawdust within the optimal range required for WPC production, which greatly improves the bonding strength between wood fiber and plastic. The multi-cylinder waste heat recovery system greatly improves the thermal efficiency, reducing the energy consumption per ton of WPC sawdust by more than 31% compared with ordinary wood material dryers. The 120-ton daily processing capacity perfectly matches the production rhythm of a large-scale WPC production line with an annual output of 50,000 tons.
Technical Specifications
| Product Specs (m) | Capacity (T/H) | Main Motor Power (kW) | Main Motor Model | Main Gearbox Model | Ratio |
| φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-1 | - |
| φ1.5×12m | 3.3 - 4.9 | 10 | Y160L-6B3 | JZQ500-III-2F | - |
| φ1.5×15m | 4 - 6 | 18.5 | Y200L-6 | JZQ500-III-2F | - |
| φ1.8×12m | 4 - 6 | 11 | Y200L-6 | ZQ50-16II-2 | 16.46 |
| φ2.2×12m | 7 - 12 | 18.5 | Y160L-6 | JZQ650-III | 31.5 |
| φ2.2×14m | 7 - 12 | 18.5 | Y160L-6 | JZQ750-III | 31.5 |
| φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-III | 31.5 |
| φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-III | 31.5 |
| φ2.4×18m | 10 - 13 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ2.4×20m | 10 - 14 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-1 | 41.52 |
| φ3×25m | 32 - 36 | 75 | YR280M-4 | ZL100-16-1 | 41.52 |
Send Inquiry to This Supplier
You May Also Like
-
Rotary Dryer for Export Grade Coco Peat Drying 200 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Gasifier Feed Wood Sawdust Drying 240 TpdNegotiableMOQ: 1 Set
-
Bentonite Rotary Drum Dryer by 20TPH to 80TPHNegotiableMOQ: 1 Set
-
Hot Sell Rotary Dryer Henan Staurk MachineryNegotiableMOQ: 1 Set
-
5TPH to 80TPH Bentonite Ore Dryer From ChinaNegotiableMOQ: 1 Set
-
High Efficiency Bentonite Rotary Dryer ManufacturerNegotiableMOQ: 1 Set
-
Industrial Bentonite Drying Machine SupplierNegotiableMOQ: 1 Set
-
Large Capacity Bentonite Drum DryerNegotiableMOQ: 1 Set
-
Energy Saving Bentonite Dryer PlantNegotiableMOQ: 1 Set
-
High Purity Silica Sand Rotary DryerNegotiableMOQ: 1 Set
