Contact Platform Support
Help CenterRotary Dryer for Pyrolytic Oil Leaf Biomass Drying 55 Tpd
Product Spotlights
2.Customizable mineral powder drying line
3.Easy installation & maintenance
4.Global mining project compatible
5.Uniform final moisture control
6.No over-drying mineral powder
7.Adjustable drying temperature
8.Consistent dried powder quality
9.Fine mineral powder drying protection
Related Products
-
Rotary Dryer for Pellet Plant Bamboo Shavings Drying 115 TpdNegotiableMOQ: 1 Set -
Rotary Dryer for Export Grade Coco Peat Drying 200 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Gasifier Feed Wood Sawdust Drying 240 TpdNegotiableMOQ: 1 Set
-
Bentonite Rotary Drum Dryer by 20TPH to 80TPHNegotiableMOQ: 1 Set
-
Hot Sell Rotary Dryer Henan Staurk MachineryNegotiableMOQ: 1 Set
Product Introduction
This 55 tpd rotary dryer for pyrolytic oil leaf biomass drying is a professional medium-small capacity continuous drying equipment tailored for urban green waste pyrolytic oil production pre-treatment scenarios. It adopts a low-temperature nutrient-locking, anti-flying and high-efficiency dehydration structure adapted to the characteristics of light texture, easy flying and strict moisture control of raw crushed leaf biomass for pyrolytic oil extraction, with a daily processing capacity of 55 tons of wet raw leaf biomass. It can reduce the moisture content of raw materials from 45%~59% to the optimal 6%~10% required for subsequent high-temperature pyrolysis oil production at one time, and the dried leaf materials can be directly and stably fed into the next-stage pyrolysis reactor system. It is the core pre-drying equipment to ensure the high oil yield, low impurity content and stable quality of finished pyrolytic oil products.
Working Principle
The obliquely installed compact multi-cylinder insulation main body is driven by a stable frequency-conversion transmission system to rotate at a low and uniform speed. The light wet crushed leaf raw materials are fed into the inner cylinder, and the fluffy materials are continuously lifted and scattered by the built-in special anti-flying soft lifting plates as the cylinder rotates, fully contacting with the low-temperature clean hot air flow. The free moisture in the leaves is precisely and evenly evaporated through the multi-stage independent constant temperature zones, and the dried leaf materials that meet the pyrolytic oil production feeding standards are stably discharged from the discharging end, completing the 55-ton daily continuous drying process.
Core Features
This 55 tpd model has multiple targeted advantages for pyrolytic oil leaf biomass drying. The low-temperature nutrient-locking drying system completely retains the high oil-content organic components in the leaf biomass, avoiding the loss of volatile oil precursors caused by high-temperature damage, and the pyrolysis oil yield is increased by more than 15%. The fully enclosed anti-flying operation design avoids the flying loss of light leaf materials, and the material recovery rate is as high as 97%. The multi-cylinder waste heat recovery system can directly use the waste heat from the pyrolysis tail gas, reducing the energy consumption per ton of crushed leaves by more than 29% compared with ordinary leaf material dryers. The 55-ton daily processing capacity perfectly matches the production rhythm of medium-sized urban green waste pyrolytic oil factories with an annual output of 18,000 tons
Technical Specifications
| Product Specs (m) | Capacity (T/H) | Main Motor Power (kW) | Main Motor Model | Main Gearbox Model | Ratio |
| φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-1 | - |
| φ1.5×12m | 3.3 - 4.9 | 10 | Y160L-6B3 | JZQ500-III-2F | - |
| φ1.5×15m | 4 - 6 | 18.5 | Y200L-6 | JZQ500-III-2F | - |
| φ1.8×12m | 4 - 6 | 11 | Y200L-6 | ZQ50-16II-2 | 16.46 |
| φ2.2×12m | 7 - 12 | 18.5 | Y160L-6 | JZQ650-III | 31.5 |
| φ2.2×14m | 7 - 12 | 18.5 | Y160L-6 | JZQ750-III | 31.5 |
| φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-III | 31.5 |
| φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-III | 31.5 |
| φ2.4×18m | 10 - 13 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ2.4×20m | 10 - 14 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-1 | 41.52 |
| φ3×25m | 32 - 36 | 75 | YR280M-4 | ZL100-16-1 | 41.52 |
Send Inquiry to This Supplier
You May Also Like
-
5TPH to 80TPH Bentonite Ore Dryer From ChinaNegotiableMOQ: 1 Set
-
High Efficiency Bentonite Rotary Dryer ManufacturerNegotiableMOQ: 1 Set
-
Industrial Bentonite Drying Machine SupplierNegotiableMOQ: 1 Set
-
Large Capacity Bentonite Drum DryerNegotiableMOQ: 1 Set
-
Energy Saving Bentonite Dryer PlantNegotiableMOQ: 1 Set
-
High Purity Silica Sand Rotary DryerNegotiableMOQ: 1 Set
-
Quartz Sand Drying Plant ManufacturerNegotiableMOQ: 1 Set
-
Industrial Silica Sand Dryer SupplierNegotiableMOQ: 1 Set
-
China Silica Sand Dryer FactoryNegotiableMOQ: 1 Set
-
10TPH Gold Ore Rotary Dryer MachineNegotiableMOQ: 1 Set
