Enterasys A4H254-8F8T P0973JP Ethernet edge switch

The Enterasys A4H254 - 8F8T P0973JP is an Ethernet edge switch. Port Configuration: It has 8 Fast Ethernet ports and 8 Gigabit Ethernet ports, which can meet the connection requirements of various devices. It is suitable for edge connections in small to medium-sized networks and enterprise environments, and can be connected to devices such as desktop computers, printers, and IP phones. Power Supply Specifications: It uses a power supply of AC 100 - 240V, 50 - 60Hz. The wide voltage range design enables it to adapt to different power supply environments, making it convenient to use in various places. Switching Capacity: The switching capacity is 16Gbps, which can achieve high-speed data forwarding, ensure the smooth transmission of data in the network, reduce data congestion and latency, and meet the needs of multiple devices communicating simultaneously.

Functional Features: It supports the VLAN (Virtual Local Area Network) function. By dividing VLANs, the security and management efficiency of the network can be improved. Devices of different departments or functions can be divided into different VLANs to achieve the isolation of broadcast domains. It provides a Web-based management interface, allowing network administrators to conveniently configure and monitor through a browser without complex command-line operations. This reduces the management threshold and enables convenient and quick setup and management of the switch. Physical Characteristics: It has a size suitable for 1U rack-mounted installation and weighs approximately 2.5kg. The compact design allows it to be easily installed on a standard rack, saving space and facilitating deployment in network cabinets. Working Environment: The working temperature range is from 0°C to 40°C, and the humidity is from 10% to 90% (non-condensing). It can operate stably in common office environments and adapt to most indoor environmental conditions.

The installation steps of the Enterasys A4H254 - 8F8T P0973JP switch are as follows: Preparation Work: Confirm that the equipment and accessories are complete, including the switch, installation screws, power cord, etc., and check whether there is any damage to the appearance of the switch. Prepare the tools required for installation, such as a screwdriver. Select an appropriate installation location, which requires good ventilation, dryness, and no strong electromagnetic interference. The ambient temperature should be between 0°C and 40°C, and the humidity should be between 10% and 90% (non-condensing). If installing in a cabinet, ensure that the cabinet is ready and meets the installation requirements of the equipment. Installation to the Designated Location: Installation in the Cabinet: If it is a 1U rack-mounted installation, install the switch on a standard 19-inch cabinet through ear mounts or rails. First, install the ear mounts on both sides of the switch and fix them with screws. Then, install the switch together with the ear mounts in the corresponding position of the cabinet and tighten the screws to ensure that the switch is firmly installed. Placement on the Workbench: You can also place the switch on a stable and sturdy workbench, ensuring that there is enough space around the switch for ventilation and access to the ports. Note that it should be kept away from other devices that may cause interference.

Power Connection: Insert one end of the AC power cord into the power interface of the switch, and the other end into a power socket that complies with the power specifications (AC 100 - 240V, 50 - 60Hz). Before inserting the power, make sure that the power switch of the switch is in the off state. Connection of Network Devices: Use an Ethernet cable to connect the devices that need to be connected (such as desktop computers, printers, IP phones, etc.) to the corresponding ports of the switch. Insert one end of the cable into the network interface of the device, and the other end into the Fast Ethernet port or Gigabit Ethernet port of the switch. If there is an uplink requirement, you can use the Gigabit Ethernet port to connect to other switches or network devices. Installation Check: Check whether all connections are secure, including the power cord, network cable, etc., to ensure that there are no loose or improperly plugged-in situations. Check the indicator light status of the switch. After the power is turned on, the power indicator light should light up, and the port indicator lights of the connected devices should also light up or flash according to the connection and working status of the devices.