IEC61032 Figure 7 Rigid Finger Probe for Test Probe 11
IEC61032 Figure 7 Rigid Finger Probe for Test Probe 11
1. Introduction:
It is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers.
2. Specification:
diameter of test finger |
12mm |
Length of test finger |
80mm |
Diameter of baffle |
50mm |
Thickness of baffle: |
5mm |
Strength range |
10N, 20N, 30N, 40N, 50N |
Material |
insulating material, metal |
3. Picture:
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Figure 13 Children Finger Probe Test Probe 19 With 5.6mm FingerUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 14 Test Corn Probe 31US$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 15 Test Probe 32 With 25mm RodUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 16 Test Probe 41 With 30mm ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 17 Test Probe 43 With Calibrated Certificate Authorized by ISO17025 LabUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 4 Test HookUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-24 Figure 102 Scratch Test PinUS$ 60 - 400MOQ: 1 Piece
-
IEC60884-1 1N & 20N Test Probes for Socket-outlet No-accessibility of Live Parts Test Gauges Through ShuttersUS$ 60 - 400MOQ: 1 Piece
-
Interlock Concealment Test Probe IEC60335-2-25 Fig 101US$ 60 - 400MOQ: 1 Piece
-
PG-PA145 UL982 Test Rod ProbeUS$ 60 - 400MOQ: 1 Piece
