IEC61032 Test Probe A Used for IP1X Testing
IEC61032 Test Probe A used for IP1X Testing
1. Introduction:
Designed according to IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand.
2. Specification:
Diameter of test sphere: |
50mm |
Diameter of baffle: |
45mm |
Thickness of baffle: |
4mm |
Diameter of handle: |
10mm |
Length of handle: |
100mm |
||
Material: insulating material (handle and baffle), metal (test sphere) | |||
Note: 50N thruster for optional
3. Picture
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Finger Test Probe Figure 8 Test Probe 12US$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 9 Short Pin Test Probe 13 With CNAS Calibration CertificateUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 10 Test Probe 14US$ 90 - 400MOQ: 1 Piece
-
IEC61032 Figure 11 Test Probe 17US$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 12 Small Child Finger Probe Test Probe 18US$ 60 - 200MOQ: 1 Piece
-
IEC61032 Figure 13 Children Finger Probe Test Probe 19 With 5.6mm FingerUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 14 Test Corn Probe 31US$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 15 Test Probe 32 With 25mm RodUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 16 Test Probe 41 With 30mm ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 17 Test Probe 43 With Calibrated Certificate Authorized by ISO17025 LabUS$ 60 - 400MOQ: 1 Piece
