IEC61032 Figure 9 Short Pin Test Probe 13 With CNAS Calibration Certificate
IEC61032 Figure 9 Short Pin Test Probe 13 with CNAS Calibration Certificate
1. Introduction:
It is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536)
2. Specification:
diameter of test pin |
head 3mm, bottom 4mm |
length of test pin |
15mm |
diameter of baffle |
25mm |
thickness of baffle |
4mm |
material |
insulating material, metal |
3. Picture:
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Figure 15 Test Probe 32 With 25mm RodUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 16 Test Probe 41 With 30mm ProbeUS$ 60 - 400MOQ: 1 Piece
-
IEC61032 Figure 17 Test Probe 43 With Calibrated Certificate Authorized by ISO17025 LabUS$ 60 - 400MOQ: 1 Piece
-
IEC60065 Figure 4 Test HookUS$ 60 - 400MOQ: 1 Piece
-
IEC60335-2-24 Figure 102 Scratch Test PinUS$ 60 - 400MOQ: 1 Piece
-
IEC60884-1 1N & 20N Test Probes for Socket-outlet No-accessibility of Live Parts Test Gauges Through ShuttersUS$ 60 - 400MOQ: 1 Piece
-
Interlock Concealment Test Probe IEC60335-2-25 Fig 101US$ 60 - 400MOQ: 1 Piece
-
PG-PA145 UL982 Test Rod ProbeUS$ 60 - 400MOQ: 1 Piece
-
PA160B UL Test Probe for Hazardous Moving PartsUS$ 60 - 400MOQ: 1 Piece
-
PA140 UL1278 Test Probe for Film Coated WireUS$ 60 - 400MOQ: 1 Piece
