Aviation Hydraulic Oil Thermal Oxidation Stability and Corrosion Tester

Aviation Hydraulic Oil Thermal Oxidation Stability and Corrosion Tester

Product model: JF0208

Instrument introduction

This instrument is suitable for testing the thermal oxidation stability and corrosion performance of aviation hydraulic oil. The test method: put the metal sheet group used for the test into the oxidation tube equipped with the sample, and carry out the test under the specified conditions. According to the change of acid value, kinematic viscosity and corrosion of metal sheet before and after hot oxidation, the thermal oxidation stability and corrosion were evaluated.

Technical Parameter

1. Applicable standards: SH/T0208 

2. Temperature control range: Room temperature ~200±0.1℃

3. Heating method: Metal bath heating

4. Temperature control mode: PID digital display

5. Timing mode: digital display timer

6. Working unit: 2 holes

7. Working power supply: AC220V 50HZ

8. Power of the whole machine: 2000W

9. Flow control: precision flowmeter

Main Feature

1. The instrument is benchtop, including heating bath and flowmeter. Stainless steel lid with holes, can be put into the sample bottle;
2. Stainless steel structure of ceramic coating;
3. Environment-friendly metal bath heating, reduce the damage of oil smoke to human body, efficient thermal insulation effect;
4. Stainless steel heater;
5. Very precision flowmeter, with needle valve, flow 0~120mll/min;
6. Air filter, with glass wool;
7. The controller purification system consists of three buffer bottles, one sulfuric acid bottle, one activated carbon and one anhydrous calcium chloride;
8. Micro processing thermostat and PID control, digital display temperature, precision 0.1℃, Pt100 RTD temperature probe;
9. Operating temperature range: room temperature ~200°C; Safety measures to prevent overheating or low liquid level;