Contact Platform Support
Help CenterDIN51351 Refrigerator Oil Floc Point Tester
Product Spotlights
Related Products
-
ASTM D445 Automatic Petroleum Products High and Low Temperature Kinematic Viscosity TesterUS$ 10000 - 16800MOQ: 1 Piece -
GB/T6533 Crude Oil Water Content Tester(Centrifugal Separation Method)US$ 4800 - 5800MOQ: 1 Piece
-
ASTM D7097 MHT Engine Oil High Temperature Oxidation Deposit TesterUS$ 76000 - 77100MOQ: 1 Piece
-
ASTM D6371 Cold Filter Plugging Point of Diesel Fuel TesterUS$ 5000 - 6000MOQ: 1 Piece
-
Полный автоматический имитатор холодного качения CCS для испытания двигателей на видимость вязкостиUS$ 17000 - 22000MOQ: 1 Piece
Refrigerator Oil Floc Point Tester
Product model: JF12577
Product Introduction
The principle of the instrument: mix a certain amount of sample and refrigerant in the test tube, dissolve each other, put it in the cold bath of the flocculation point tester, gradually cool down and cool down at a certain speed, observe under the light, when it starts Note the temperature at which opalescence or flocculation occurs. This instrument is suitable for mineral oil type refrigerating machine oil, and also suitable for synthetic oil type refrigerating machine oil.
Technical Parameter
1. Applicable standard: DIN51351, GB/T12577
2. Refrigeration method: Dual compressor refrigeration
3. Temperature range: Rt～-60℃
4. Temperature control method: Digital display PID temperature
controller
5. Power of the whole machine: 1000W
6. Working unit: 2 tubes
7. Working power supply: AC220, 240V/50, 60HZ
8. Instrument size: 810 * 690 * 820mm
9. Net weight: 65KG
Performance Characteristics
1. Double compressor cascade refrigeration to ensure the supply of cooling capacity;
2. Microcomputer temperature controller, digital display, accuracy ±0.2℃ PT100 sensor;
3. The glass Dewar bottle is used as a cold bath, and the heat preservation effect is good;
4. The split structure can reduce the damage caused by the vibration of the instrument;
5. Stainless steel heater;
6. The evaporator adopts copper chrome-plated coil;
7. There is sunlight behind the Dewar flask, which is convenient for observation;
8. The unique stainless steel clamping system can quickly clamp the test tube;
9. The special glass test tube meets the standard requirements.
Send Inquiry to This Supplier
You May Also Like
-
IP227 JET FUEL SILVER STRIP CORROSION TESTERUS$ 2400 - 4000MOQ: 1 Piece
-
ASTM D2276 Jet Fuel Particulate Contaminant in Aviation Fuel TesterUS$ 1300 - 1400MOQ: 1 Piece
-
ASTM D664 Petroleum Product PH Analyzer (Potentiometric Titration Method)US$ 4300 - 5400MOQ: 1 Piece
-
SH/T0165 Lubricant High Vacuum Distillation TesterUS$ 3500 - 7600MOQ: 1 Piece
-
ASTM D1500 Petroleum Products ColorimeterUS$ 1250 - 1300MOQ: 1 Piece
-
ASTM D2274 ISO12205 NFM07047 IP388 Oxidation Stability of Distillate Fuel Oil Tester Accelerated MethodUS$ 4880 - 5400MOQ: 1 Piece
-
ASTM D1657 Density or Relative Density of Liquefied Petroleum Gas TesterUS$ 3700 - 3800MOQ: 1 Piece
-
ASTM D4377 Automatic Digital Display Trace Water Content Tester Karl Fischer MethodUS$ 4600 - 4700MOQ: 1 Piece
-
ASTM D95 Petroleum Product Water Content AnalyzerUS$ 320 - 350MOQ: 1 Piece
-
ASTM D93 Flash Point by Pensky-Martens Closed Cup TesterUS$ 610 - 650MOQ: 1 Piece
