German Technical Background VOK-P105 Wetting Dispersant Prevent Settlement and Sagging Replaces BYK-P105

German technical background VOK ®- Disper P105 Wetting Dispersant

VOK ®- Disper P105 is a controlled flocculating wetting and dispersing agent used for solvent based and solvent-free adhesives and room temperature curing resin systems to stabilize fillers. VOK ®- Solventless varieties of Disper P104.

Product Information

Chemical composition

Low molecular weight unsaturated polycarboxylic acid polymer

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Acid value: 365 mg KOH/g

Density (20 ℃): 1.05 g/ml

。 

Special precautions

The compatibility is limited in the paint system with gasoline solvent as solvent or diluted with gasoline solvent. VOK due to high viscosity ®- The Disper P105 should be heated before use to make it easier to flow. Another supply form of this auxiliary is 50% solution in xylene/diisobutyl ketone, namely VOK ®- Disper P104。 

Application field

an adhesive

Product features and advantages VOK ®- Dispatch P105 can provide a kind of controlled flocculation of the desired filler, and build a bridge between the filler particles, thus forming a three-dimensional network structure. This controlled flocculation effectively prevents sedimentation and sagging. VOK ®- Disper P105 is specially recommended for acrylate adhesive and polyurethane adhesive.

Recommended dosage

0.5-1.5% of auxiliary dosage (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good performance, the additive must be added to the abrasive before the pigment is added.

Room temperature curing resin system

Product features and advantages

VOK ®- Dispatch P105 can provide a kind of controlled flocculation of the desired filler, and build a bridge between the filler particles, thus forming a three-dimensional network structure. This controlled flocculation effectively prevents sedimentation and sagging. VOK ®- Disper P105 is specially recommended for acrylate systems.

Recommended dosage

0.5-1.5% of auxiliary dosage (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good performance, the additive should be added before adding solids.