German Technical Background VOK-206 Wetting Dispersant Improving Surface Properties in Waterborne Coatings Replaces BYK-206

German technical background VOK ®- Disper 206 Wetting Dispersant

VOK ®- Disper 206 is based on oxidized high-density polyethylene matting wax dispersion, which is used to improve surface properties in waterborne coatings.

Product Information

Chemical composition

Oxidized high-density polyethylene wax dispersion

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Non volatile matter (60 min., 125 ° C): 35%

Carrier: water

Melting point (wax composition): 135 ° C

Particle size (Hegemann fineness meter):<30 µ m

Viscosity (23 ° C, D=200/s): 100 mPa · s

PH value: 10

Storage and transportation

The product is sensitive to temperature. Store at 5-35 ° C and mix well before use.

Special precautions

After the product is opened for use, there will be dry residues of additives on the inner wall, which will cause defects to the terminal products. The additives must be stirred and filtered before use.

Product features and advantages

The additive can improve scratch resistance and give soft touch in wood furniture, floor varnish and architectural coatings. VOK ®- Disper 206 has an extinction effect.

Adding method and processing guidance

It is better to add the additive at a low shear rate at the end of production and stir it evenly before use.