Contact Platform Support
Help CenterKRD41 Small Drop Test System
Related Products
-
KRD41-100 New Design Small Drop Teste for Free-fall TestNegotiableMOQ: 1 Set -
KRD40 Zero-distance Drop Test SystemNegotiableMOQ: 1 Set
-
KRD41 Small Drop Test SystemNegotiableMOQ: 1 Set
-
New Type Zero-distance Drop Test Machine /Large-scale Testing Equipment Lab Drop TesterNegotiableMOQ: 1 Set
-
Mobile Phone Free Fall Drop Test Machine Free Fall Drop Tester Vertical Drop Impact TestingNegotiableMOQ: 1 Set
The KRD41 Series Small Drop Tester is primarily used for packaged goods that may be subjected to vertical drops during transportation and handling. Through standardized tests (face drop, edge drop, corner drop, etc.), data is collected to provide a design basis for cushioning and vibration reduction design, as well as for packaging material selection. The system complies with ISO2248-1985, IEC68-2-32, ISTA Test Procedures 1A, 1B, 1C, 1D, 1G, 2A, 2B, 2C, 3A, 3B, 3E, 3F, 3H, 3K, 6-AMAZON. Products can be tested either with or without packaging to evaluate impact resistance or drop damage during transportation. This is an indispensable testing method for improving product quality, applicable to electronic product research and development, quality control, manufacturing, and other stages.
Upper and lower displacement limit to guarantee safe.
The lifting height can be adjusted arbitrarily to meet the different requirements.
It can clamp and drop the test sample at any angle
Just place the machine on a flat marble or concrete floor, no special foundation needed
Hand-held pad human-computer interaction software, easy to operate
The drop height is adjustable and the control is accurate up to 2mm
No special foundation required, no other complicated operation or installation
Technical Specifications:
|
Model Parameters |
KRD41-100 |
KRD41-200 |
|
Max. Load (kg) |
100 |
200 |
|
Drop Height (mm) |
300～1500 |
|
Max. Specimen Size (mm) |
Depth 840 |
Depth 840 |
Position Accuracy |
±2% or ±10mm (subject to the larger value) |
|
|
Drop Zone Size （W*D/mm） |
1200×1200 |
1400×1400 |
Test Mode |
Face, Edge and Angle |
|
Power |
1-phase AC 220V±10% 50Hz |
|
|
Working Environment |
Temperature range 0～40℃, Humidity≤80% (non-condensing) |
|
Installation Condition |
Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment |
|
Standards |
ISO2248-1985 IEC60028-2-27 ISTA |
|
Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail.
Standards
ISO 2248-1985 Packaging — Complete, filled transport packages — Vertical impact test by dropping
IEC 60068-2-32 Test Ed: Free Fall
ISTA Test Procedures: 1A, 1B, 1C, 1D, 1G, 2A, 2B, 2C, 3A, 3B, 3E, 3F, 3H, 3K, 6-AMAZON
Projects References
Send Inquiry to This Supplier
You May Also Like
-
KRD40 Zero-distance Drop Test SystemNegotiableMOQ: 1 Set
-
Small Drop Test Machine Free Fall Drop Tester Vertical Drop Impact TestingNegotiableMOQ: 1 Set
-
KRD42 Double Lift Zero-distance Drop Test SystemNegotiableMOQ: 1 Set
-
KRD80 Mechanical Vibration ShakerNegotiableMOQ: 1 Set
-
KRD17 Pneumatic Bidirectional Vertical Shock Testing SystemUS$ 10000 - 100000MOQ: 1 Set
-
KRD32 Non-standard Centrifugal Constant Acceleration TesterNegotiableMOQ: 1 Set
-
KRD10 Hydraulic Vertical Shock Test SystemNegotiableMOQ: 1 Set
-
KRD20 Pneumatic Bump Test MachineNegotiableMOQ: 1 Set
-
KRD13 High Energy Shock Test MachineNegotiableMOQ: 1 Set
-
KRD16 MIL-S-901D High Impact Shock Test SystemNegotiableMOQ: 1 Set
