Contact Platform Support
Help CenterHigh Performance Carbon Steel Flange Ending Floating Steam Trap Valve
Product Spotlights
Related Products
-
TD42 Thermodynamic Disc Steam Trap for RefineryNegotiableMOQ: 1 Piece -
FT44 WCB Stainless Steel Free Ball Float Steam Trap for RefineryNegotiableMOQ: 1 Piece
-
Reliable Free Float Steam Trap for Textile, Paper and Sugar IndustriesNegotiableMOQ: 1 Piece
-
Inverted Bucket Steam Trap Manufacturer for Oil and Gas IndustryNegotiableMOQ: 1 Piece
-
WDV CS41H-16C Free Float Steam Trap, Carbon Steel / Stainless Steel, For Chemical Processing, Nuclear Power, Food & Pharmaceutical ApplicationsNegotiableMOQ: 1 Set
Free-ball float trap
The drain valve is opened or closed by taking advantage of the change of liquid level of condensate water with the high-precision grinding stainless steel hollow float ball in the valve cavity. This steam trap has a simple structure, mainly consisting of float balls and automatic emptying devices. The sole action elements, namely, the stainless steel hollow float ball is manufactured by high-precision grinding process, and its entire sphere can serve as the sealing face and will not be worn intensively during the work, so it has a longer service life. In addition, there is no wearing part in the valve cavity, with a high reliability. The float ball can freely adjust the openness of the valve opening in response to the change of water level and discharge the condensate water continuously with a subcooled temperature of about 0℃ and higher efficiency.
The automatic emptying devices fall into two types : (within low pressure PN25) consisting of reservoir thermo-sensitive elements and (overheated steam system) consisting of bimetals.
Merits
1. The sole moving component is the high-precision grinding stainless float ball, which can resist erosion.
2. Its simple structure is convenient for maintenance.
3. To drain continuously with low noise, without being affected by the fluctuation of the pressure.
4. To be equipped with automatic emptying devices and it can eliminate air quickly and prevent air blocking and steam locking.
5. Small volume and large displacement.
6. To drain whenever there is water left over so as to quicken the startup speed of the system.
When the equipment is just started, the low-temperature condensate and air enter the valve cavity at the same time. At this time, open the automatic evacuation device to remove the air, so that the low-temperature condensate can enter the valve cavity smoothly. The liquid level of the condensate in the valve cavity will rise immediately, so that the floating ball will rise. Open the valve hole, so that the condensate can be discharged quickly. The steam in front of the equipment will enter the heating equipment quickly, so that the equipment can be heated quickly and heated up. When the steam or the temperature is lower than When the high temperature condensed water enters the valve chamber, the automatic emptying device starts to expand, the automatic air exhausting device is closed, and the drain valve starts to work normally. At this time, the floating ball in the valve chamber will rise and fall with the level of condensate, which can discharge condensate continuously. Because the valve seat hole of the free floating ball type drain valve is always below the condensate level, forming a water seal, the water vapor is naturally separated, and there is no steam leakage during operation. The minimum working pressure of the valve is 0.01Mpa, from 0.01Mpa to the maximum working pressure range, it is not affected by the fluctuation of temperature and working pressure, and can work continuously. Its minimum supercooling degree is about 0 ℃. Because the valve can automatically and continuously remove the condensate, there is no water accumulation in the heating equipment, which can make the heating equipment achieve the ideal heat exchange efficiency. It is one of the ideal drain valves for heating equipment of production process.
Send Inquiry to This Supplier
You May Also Like
-
OEM Inverted Bucket Steam Trap IB Series | High Efficiency Mechanical Steam Trap for Boiler Steam Line | Cast Steel Flanged Steam Trap ManufacturerNegotiableMOQ: 1 Piece
-
Wdv FT14 Lever Float Steam Trap | High Efficiency Ball Float Steam Trap for Heat Exchanger Boiler and Steam Heating SystemsNegotiableMOQ: 1 Piece
-
Wdv TD42 Thermodynamic Disc Steam Trap | Durable Mechanical Steam Trap for Steam Lines | High Efficiency Condensate DrainageNegotiableMOQ: 1 Piece
-
OEM Thermostatic Bellows Steam Trap | Stainless Steel Temperature Sensitive Steam Trap for Industrial Steam SystemsNegotiableMOQ: 1 Piece
-
Wdv BK Series Bimetallic Steam Trap | Durable Thermostatic Steam Trap for Steam Main, Steam Tracing and Industrial Heating SystemsNegotiableMOQ: 1 Piece
-
High Performancep Bellows Type Steam Trap Thermostatic Steam Trap for Steam PipelineNegotiableMOQ: 1 Piece
-
CA40 PN63 Stainless Steel Thermodynamic Steam Trap Valve 1 Inch Threaded High Pressure Steam DrainerNegotiableMOQ: 1 Piece
-
Thermodynamic Disc Steam Trap Flanged/Thread/Socket WeldNegotiableMOQ: 1 Piece
-
STEAM TRAP DN25/1INCH, THERMODYNAMIC, THREADED TYPE CONNECTION NPT, ASME CLASS 600 PN63/100 Preferred Brand: ARMSTRONGNegotiableMOQ: 1 Piece
-
FQ1steam Trap Flanged Ball Float Steam Valve (FT14-Flange) Steam TrapNegotiableMOQ: 1 Piece
