Medical Centrifuge Calibration Device Made in China

Medical Centrifuge Calibration device made in China

Parameters and Configuration

I. Technical Parameters

Speed Parameters

★ Speed Measurement Method: Non-contact laser vibration measurement method, no need for any sensor to contact the measured equipment;

Measurement Range: (100~100,000) r/min, resolution 0.001 r/min;

★ Measurement Accuracy: ≤10,000 r/min: better than 0.2%; ＞10,000 r/min: better than 0.1%;

Timing Error: Better than ±0.1s;

Laser Aiming: Supported;

Wireless Testing Distance: (200~1,000) mm;

Real-time Graphs: Supports display of time-domain, frequency-domain, and historical speed graphs;

★ Operating System: Android; System Storage: 3GB (system memory) + 32GB (internal storage);

★ Communication Method: Wireless communication, supporting WiFi/4G cellular network;

Human-Computer Interaction: LCD touch screen (720×1440);

Integrated wireless operation, no computer or any data cable connection required during operation;

Power Supply Mode: Built-in rechargeable battery.

Temperature Parameters

Probe Quantity: 4 units (including two lengths, compatible with (1.5~300) mL rotors);

Temperature Measurement Range: (-40~85) ℃;

System Accuracy: ±0.10 ℃;

Temperature Resolution: 0.01℃;

Timing Error: Better than ±0.1s;

Offline Storage: Supported, each probe supports storage of no less than 100,000 sets of data;

★ Main Body Diameter: No more than 16mm, supporting built-in operation inside the rotor (speed not less than 20,000 rpm);

★ Communication Method: Wireless real-time transmission;

Power Supply Mode: Battery-powered, supporting wireless charging;

Waterproof and Dustproof: Supported.

II. Configuration List

Intelligent Tachometer × 1 unit

Wireless Real-time Probe × 4 units

Dedicated Data Processing Device × 1 unit

Calibration Certificates (one each for temperature, speed, and time) — Optional Item

Medical centrifuge Calibration device picture