Shanghai Xiangbao XB-AR900H Flagship Edition Binding Machine

Product Description: 

Machine Features: Voice Broadcasting: 

1. After the temperature reaches, it will be read out in voice. You can do other things when the machine is heated. You don’t need to go to the machine to see if the temperature reaches it often.

2. There will be some teaching content during the operation. You can use voice reminders to understand what to do next.

3. If you forget to place the inner page of the cover during operation, the machine will be broadcast in voice mode. There is no need to manually find the problem and turn the code, or even do not bend the waist to know the reason.

Humanized design: Equipped with a bookkeeping desk/inner page bookshelves, built-in operation introduction, which is more convenient to use. External vacuum cleaner: used to suck paper scraps away after brushing, avoid entering the glue groove, make the binding effect better, and extend the service life of the machine. 

Parallel dual linear guide rail design: 

1. The guide rail is directly fixed to the C groove, which is more stable than the multi-point supported guide rail structure.

2. The guide rail adopts an I-shaped shape. When the platform is fixed on it, the gap between up and down and left and right is very small. The platform is fixed at 4 corners, which is more stable.

3. Ensure the stability of the station when the machine is running so that the binding effect remains unchanged. Bolded guide rod, durable and will not deform.

4. Parallel design: The car is rectangular with 4 corners. The car is fixed to the guide rail by 4 corners on both sides. The binding effect will be better.

Milling cutter location: 

1. Use the sun knife plus a small milling cutter mode to ensure that every piece of paper in the book will be woven and there will be no leakage of milling, so that the glueing effect will be better.

2. The V-shaped small milling cutter is made of tungsten steel, which is not easy to wear, has a high glue affinity, and has a better glue penetration effect.

3. High rotation number of high-power milling cutter motor: The power of the milling cutter motor is 750W, which ensures that the milling cutter motor will not be blocked. The milling cutter motor has a rotation number of 2800 revolutions. The effect of milling a book in this machine is twice that of other machines, and ensures that the milling cutter effect is very good regardless of one piece of paper or 500 pieces of paper.

The glue groove area 

1.  There are 7 (Taiwan) heating pipes ensure quality, and the 4-channel control heating is intelligently switched when heating, and the temperature control is accurate.

2. Extend the temperature measuring rod (imported temperature measuring sensor), located in the middle of the glue groove, extend into the inside of the glue groove to directly measure the glue temperature to make the temperature measurement more accurate. Combined with the die-cast abrasive glue groove (the inner wall of the glue groove is relatively smooth and there is less glue residue) to make the melted glue clear as water, and it is not easy to burn yellow and deteriorate.

3. Side glue double guide pulley design: reduce the impact of side glue and close the resistance to ensure that the side glue is stable and the small car clamp surface will not wear.

4. Dual temperature control system, more effectively reduces glue yellowing (independent side glue temperature, independent bottom glue temperature)

Circuit: 

1. Designed by Japanese engineers, with clear high and low voltage, reasonable design, and not easy to damage.

2. Extra large circuit board (larger than A4 paper) has better heat dissipation effect.

3. The motherboard chip uses imported chips from the UK, which is very stable.

4. The high-voltage control part uses thyristor to control the service life.

5. This machine also has a quick load mode. When binding books of the same thickness, the fastest speed of opening the quick load mode reaches 11.25 seconds per book.

7-inch color touch screen: 

1. Advantages of the large screen: it is not easy to cause mistaken touch when clicking, and you can directly view it

2. Full Chinese display operation, no requirements for entry

3. You can directly input the temperature setting, and the built-in help function can directly understand the requirements of each parameter setting and easy to operate.

Mechanical display of square corners: 

1. When binding the book, the angle can be adjusted as needed.

2. The adjustment amount is displayed in numbers, corresponding to the reference table. 1-5 cm bookboard is formed at one time.

Pallet table 

1. Adopt a vertical parallel rising design, and there will be no more glue on one side, less glue on the other side, uneven base glue, and stable binding effect.

Technical parameters: 

Model 900H Binding Machine (Flagship Edition) Black base cabinet 

Display mode 7-inch color touch screen 

Maximum Book binding length 320mm 

Book binding thickness 55mm 

Binding speed 320 books/hour 

Milling method Sun knife + small milling cutter 

Voltage/power 220V/1400W 

Machine net weight 155kg 

Weight with wooden box 198KG 

Machine size 1274mm*744mm*1197mm 

Packing size 1347mmX750mmX1100mm 

Heating time ≥30 minutes 

Glue binding method Double glue container  Back glue/side glue