PP865 3BSE042236R1

Brand:ABB

Type:PP865 3BSE042236R1

Origin:the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Analog Inputs 16 analog inputs, differential QAIO 16/4-V: ±10 V; QAIO 16/4-A: ±20 mA Resolution 12 Bit (multiplex operation) Input impedance in signal area QAIO 16/4-V: 10 MΩ; QAIO 16/4-A: 50 Ω Analog Outputs 4 analog outputs ±10 V Resolution 12 Bit Output current Max. 5 mA Load resistance Min. 2 kΩ In-phase area ±2 V Reference Voltage Source Reference voltage +10 V DC sustained short circuit protection Load current Max. 5 mA Precision 0.1 % Accessories Plug-in terminal strips (5 are required per module) Designation Description Order number Screw terminal, 18-pole Up to max. conductor cross-section of 2.5 mm2 (14 AWG) VK055-018 Spring-power clamp, 18-pole Up to max. conductor cross-section of 2.5 mm2 (14 AWG) B95907-018 Detailed information and integration tips can be obtained from the user manual.ACTUATION The I/O of the digital extension module are actuated directly from an MSC, MSC II or RDIO via the extension bus (E-bus). E-BUS One MSC or MSC II can be extended with a maximum of 7 modules (e.g. QDIO or QAIO). Further digital I/O can be actuated via RDIO modules, which are connected with an MSC or MSC II via CANopen. CONFIGURATION The configuration of the digital I/O is carried out per software via the central control configuration in the Moog Axis Control Software (MACS) development environment. STATUS LEDs LEDs on the front provide information about the status of the I/O. The arrangement of the LEDs corresponds to the I/O connections. Plus switching Zero switching BASIC CIRCUIT DIAGRAM, DIGITAL OUTPUT Plus switching Zero switching Features  Digital I/O extension module QDIO 16/16-0.5: I/O positive switching QDIO 16/16-0.5N: I/O zero switching • 16 digital inputs 24 V • 16 digital I/O, 24 V, individually configurable as an input or an output 

• Connection via E-bus GENERAL The QDIO digital module is used for extension of the local inputs and outputs (I/O) of the Moog Servo Controller MSC or MSC II. The module is mounted on a DIN top-hat rail and directly connected to an MSC or MSC II, or a remote digital I/O module (RDIO) via the internal extension bus (E-bus). BModule Data Digital Remote I/O Extension Module Order number / Designation QDIO 16/16-0.5: D137-001-005 QDIO 16/16-0.5N: D137-001-004 Types of inputs/outputs QDIO 16/16-0.5: plus switching QDIO 16/16-0.5N: zero switching Connection to M3000 modules Via E-bus (max. 10 MHz) Connection technique Plug-in terminal strips for screwing or clamping Connection of the I/O 3-conductor front wiring Assembly Mounting rail NS 35/7.5 pursuant to EN 50022 (DIN top-hat rail) Status LEDs 1 Status LED per I/O Dimensions W x H x D 124 x 170 x 85.5 (attachment dimension: W = 113/118.5) mm; 4.88 x 6.69 x 3.37 (attachment dimension W = 4.45/4.67) inch Temperature range +5 °C (+41 °F) to +50 °C (+122 °F) (operation) and -25 °C (-13 °F) to +70 °C (+158 °F) (storage) Relative air humidity 10 % to 95 % (non-condensing)