ALSTOM UT150-1

Brand:ALSTOM

Type:UT150-1

Origin:the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Module Data Digital Control Module Designation Moog Servo Controller II (MSC II) Order number D136-002-002 MSC II D136-002-001 MSC II : As D136-002-002 but additional Profibus-DP interface D136-002-003 MSC II : As D136-002-002 but additional dual EtherCAT Master interface Connection technique Plug-in terminal strips for screwing or clamping Assembly NS 35/7.5 mounting rail pursuant to EN 50022 (DIN top-hat rail) Dimensions W x D x H (mm) 124 × 170 × 85.5 (attachment dimension: W = 113 / 118.5) Temperature range +5 °C (+41 °F) to 55 °C (+131 °F) (operation) and -25 °C (-13 °F) to +70 °C (+158 °F) (storage) Mean temperature in operation for 24 hrs.: Max. +50 °C (+122 °F) Relative air humidity 10 % to 95 % (non-condensing) Operation height Max. 2000 m (6500 feet); storage/transport max. 3000 m (9800 feet) Processor PowerPC Processor, 32 Bit, RISC architecture with floating point unit Memory 128 MB RAM, 32 MB Flash EEPROM; data maintenance: typically 10 years Standards Operating equipment demands and examinations IEC 61131-2 Interference emission / immunity EN 61000-6-4 / EN 61000-6-2, industrial part Shock / vibration IEC 60068 part 2-27 / IEC 60068 part 2-6 Protection class / protection system III / IP20 Insulation strength IEC 61131-2; test voltage 500 V DC Energy Supply Voltage supply of module electronics 24 V DC (18-36 V DC) SELV pursuant to DIN EN 60950-1 Current consumption of module electronics 0.5 A / 2 A (idling / full load) Potential separation Separate potentials for: Module electronics, 24 V supply, digital inputs/outputs, Ethernet Internal voltages Generated via internal DC/DC converters Behavior at voltage failures / cut-off of supply voltage Necessary data are permanently stored (Flash EEPROM, data maintenance typically 10 years) Interfaces Ethernet (100BaseT) 100 MBit/s with 8-pole RJ45 connection EtherCAT (optional) Dual EtherCAT Master Interface, Slave in preparation Profibus-DP slave (optional) Transmission rate adjustable up to 12 MBit/s 2 independent CAN interfaces "WCAN" "LCAN" Transmission rate adjustable, 10 kBit/s to 1 MBit/s WCAN: 2 D-Sub "WCAN" connectors on the front cover (are connected internally 1:1) LCAN: in the side Q-connectors 2 USB 1.1 interfaces Host interface(s) via USB-A connector "SIO" on front cover (TIA/EIA 232) For free use in the application program Extension bus (E-bus) Q-connectors on right and left of module for connecting up to 7 additional M3000 modules Contains a serial bus (5 to 10 MBit/s) and the LCAN bus