MVME162-213

Brand:MOTOROLA

Type:MVME162-213

Origin:the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Residential Addition/Remodel This information bulletin describes the submittal requirements and permitting process for additions and remodels to single family dwelling and duplexes, not exceeding one story in height above grade or above crawl space. The information and sample drawings provided herein are suitable as a guide and cannot be used for construction. Project specific construction plans must be submitted for review. I. Submittal Requirements A. Forms 1. Project Contacts Information Form The Project Contacts Information Form (DS-345) must be submitted with all projects. 2. Owner-Builder Verification Form The Owner-Builder Verification Form (DS-3042) is required if the property owner is acting as the general contractor. If you are not a licensed contractor and intend on performing the work yourself or hiring licensed subcontractors, an Owner-Builder Verification form must be completed and submitted with your project documents. 3. Water Meter Data Card A Water Meter Data Card (DS-16) must be completed if new plumbing fixtures are being added. This form is not required when replacing or relocating existing fixtures. 4. Stormwater Requirements Applicability Checklist Form DS-560 will be used to determine the storm water requirements for the project and is required for every plan submittal. B. Plans and Specifications Plans must be drawn to scale and be of sufficient clarity to indicate the location and extent of the proposed work. 

Existing and proposed construction and alterations to the existing home impacted by the addition should be clearly shown. Plans must show that all work conforms to the provisions of the current edition of the California Residential Code (CRC), the San Diego Municipal Code and all other relevant laws, ordinances and regulations applicable in the City of San Diego. Provide and show the following items, as applicable. 1. Site Plan and Vicinity Map See Information Bulletin 122 for detailed information. 2. Foundation (See Figure 1 & 5-9) a. Foundation Plan and Details (See Figure 1 & 5-9) i. Size, depth, and location of footings. ii. Rebar size and spacing. iii. Concrete compressive strength (minimum 2500 psi). iv. Concrete slab thickness (min. 3.5 inches). b. Raised Floor Construction i. Location of continuous foundations and pier footings. ii. Size and depth of footings. iii. Dimension of stem. iv. Size and spacing of cantilevered joists (see Table 5). v. Size and spacing of floor joists (see Table 3). vi. Location and size of crawl space access openings and vents (CRC R408).