Contact Platform Support
Help CenterVNGA160402-2S PCBN Cutting Tools High Speed Machining Bearing Steel Wind Power BearingsWith High Heat Resistance
Related Products
-
PCBN Cutting Tool for Finish Turning Processing Bearing Steel Wind Power Bearings With Hard TurningUS$ 20 - 30MOQ: 10 Pieces -
Halnn PCBN Tools for Finish Hard Turning Hardened Steel Wind Power Bearings Hard TurningUS$ 20 - 30MOQ: 10 Pieces
-
PCBN Tool for Finish Hard Part Turning 42CrMo4 Bearing Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
High Quality PCBN Cutting Tool Full Form Finish Turning Hardened Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
CBN Hard Turning GCr15SiMn Hardened Steel Materials Wind Turbine Bearing With Halnn WNGA080412-3S PCBN Cutting ToolUS$ 20 - 30MOQ: 10 Pieces
VNGA160402-2S PCBN Cutting Tools High Speed Machining Bearing steel Wind Power BearingsWith High Heat Resistance
1. Halnn Tools PCBN Cutting Tools High Speed Machining Bearing steel Wind Power BearingsWith High Heat Resistance
At present, the tool materials in the processing market are cemented carbide tools, ceramic tools and cubic boron nitride blades. Wind power bearings are large forgings. It is inevitable that deformation will occur after heat treatment, and the balance will be uneven. Therefore, it is not recommended to use ceramic tools. The cubic boron nitride insert is currently the best tool material for processing hardened steel materials. In particular, the non-metallic binder cubic boron nitride inserts BN-S20 grade and BN-S200 grade developed by Halnn Tools have a good effect on processing wind power bearings.
Halnn Tools non-metallic binders Cubic boron nitride inserts BN-S20 grades and BN-S200 grades are all Solid CBN inserts, of which BN-S200 grades are mainly used for finishing operations, and the depth of the knife is controlled at 0.5mm. Within. The BN-S20 grade can be used for rough finishing. It is mainly used for wind power bearings with a margin of >2mm or more. It can be processed by one knife, saving processing time and improving processing efficiency.
2. Advantages os Halnn Tools Brazed CBN Inserts
Halnn Tools CBN tool hard turning bearing advantages
(1) The processing efficiency is doubled: the machining efficiency is four times higher than that of the same machining accuracy.
(2) Suitable for mass production: CBN tools have high durability, reduce tool change frequency and reduce production costs.
(3) Reducing pollution: Turned iron scraps are more convenient to handle and recycle. At the same time, CBN tools are used to hard-turn bearings without adding cutting fluid to reduce environmental pollution.
The CBN tool cooperates with the vertical lathe hard turning bearing technology, with high processing efficiency and low cost. With the introduction of CBN tools, it is possible to replace the production configuration of several vertical grinding machines with lathes and reduce the construction cost of the plant.
3. Characteristics Detailed data of PCBN Cutting Tools
Insert Grade |
Processing Condition |
Machining Hardness |
Machining Materials |
BN-H21 |
Fine Finishing |
HRC62~68 |
Hardened Steel |
BN-S20 |
Roughing |
HRC45~68 |
Hardened Steel |
BN-H11 |
Fine Finishing |
HRC45~63 |
Hardened Steel |
BN-H10 |
Fine Finishing |
HRC45~68 |
Hardened Steel and High Strength Cast Iron |
BN-H20 |
Fine Finishing |
HRC45~63 |
Hardened Steel |
4.Image
5. FAQ
1. Are you a trading company or manufacturer ?
A: We are a manufacturer and wholesaler for diamond & CBN (cubic boron nitride) abrasives and tools.
2. How long is your delivery time?
A: Generally it is 3 -7 days.
2. Do you provide samples ? Is it free or extra ?
A: Normally we do not offer free samples, we could offer the sample for testing, but shipping fee is to be paid by customer as a company policy!
6. Packing
7.Contact us
If you have another question, pls feel free to contact us as below:
Contact us | |
Joanan@halnntools.com |
|
+86 17537165259 |
|
Skype |
Joanna Guo |
+86 17537165259 |
|
Send Inquiry to This Supplier
You May Also Like
-
PCBN Hard Turning Inserts for Turning 42CrMo4 Bearing Steel Materials Wind Turbine Bearing With Halnn DNGA160402-3SUS$ 20 - 30MOQ: 10 Pieces
-
Hard Part Turning 42CrMo4 Hardened Steel Materials Wind Power Bearings With Halnn DNGA160404-3S PCBN InsertsUS$ 20 - 30MOQ: 10 Pieces
-
BN-H21 PCBN Inserts Heavy Finish Interrupted Cutting Bearing Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
BN-H21 PCBN Inserts Finishing Heavy Interrupted Cutting 50Mn Materils Hardened Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
High-speed Milling Hardened Steel Mold With BN-S20 SNGN CBN Turning Tool More High EfficiencyUS$ 20 - 30MOQ: 10 Pieces
-
Rough Milling Hardened Steel Mold With Solid CBN Cutting Tools Better Wear ResistanceUS$ 20 - 30MOQ: 10 Pieces
-
Hardened Steel Mold Finishing With High Quality CBN Cutting Insert FinishingUS$ 20 - 30MOQ: 10 Pieces
-
High-speed Machining CBN Inserts Mold With BN-S20 SNGN CBN Turning InsertsUS$ 20 - 30MOQ: 10 Pieces
-
Hardened Steel CBN Indexable Insert for Mold With BN-S20 Cubic Boron Carbide InsertsUS$ 20 - 30MOQ: 10 Pieces
-
Interrupt Cutting Bearing Steel Wind Power Bearings Materials With Halnn Tools CCGW09T304-2S CBN Turning InsertUS$ 20 - 30MOQ: 10 Pieces
