Contact Platform Support
Help CenterPCBN Cutting Tool for Finish Turning Processing Bearing Steel Wind Power Bearings With Hard Turning
Related Products
-
Halnn PCBN Tools for Finish Hard Turning Hardened Steel Wind Power Bearings Hard TurningUS$ 20 - 30MOQ: 10 Pieces -
PCBN Tool for Finish Hard Part Turning 42CrMo4 Bearing Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
High Quality PCBN Cutting Tool Full Form Finish Turning Hardened Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
CBN Hard Turning GCr15SiMn Hardened Steel Materials Wind Turbine Bearing With Halnn WNGA080412-3S PCBN Cutting ToolUS$ 20 - 30MOQ: 10 Pieces
-
PCBN Hard Turning Inserts for Turning 42CrMo4 Bearing Steel Materials Wind Turbine Bearing With Halnn DNGA160402-3SUS$ 20 - 30MOQ: 10 Pieces
PCBN Cutting Tool for Finish Turning Processing Bearing steel Wind Power Bearings with Hard Turning
1. Halnn Tools PCBN Cutting Tool for Finish Turning Processing Bearing steel Wind Power Bearings with Hard Turning
The machining allowance of the slewing bearing is reserved according to the previous heat treatment process and quenching deformation. The general margin is 2-6mm. The tool needs to have excellent impact toughness and wear resistance during the machining process, so Halnn Tools recommends The integral type CBN tool BN-S20 grade, this grade is not only suitable for large diameter slewing bearing, but also suitable for non-standard bearing to replace grinding by turning. The overall quenching hardness HRC60 or more bearing ring has a large amount of one pass instead of rough grinding process. If the bearing ring with a residual amount less than 0.5mm after quenching, the BN-H20 grade of the inlaid CBN tool can be selected, and the cutting edge is more economical.
2. Advantages os Halnn Tools PCBN Cutting Tools
With the development of science and technology, the precision requirements for the processing of extra large bearings are getting higher and higher. Due to the limitation of the machining precision of the general CNC vertical lathe, the reaming reamer of the grinding process has a longer grinding time and lower efficiency. With the development and application of superhard tools (CBN tools), in many cold machining, grinding can be replaced by turning.
CBN tool features for hard-turned bearing:
(1) CBN tools have high oxidation resistance. When machining bearings with CBN tools, dry cutting is used as much as possible.
(2) CBN tools have a low coefficient of friction, which is conducive to the improvement of the surface quality.
3. Characteristics Detailed data of PCBN Cutting Tools
Insert Grade |
Machining Hardness |
Processing Condition |
Machining Materials |
BN-H11 |
HRC45~63 |
Fine Finishing |
Hardened Steel |
BN-S20 |
HRC45~68 |
Roughing |
Hardened Steel |
Semi-finishing | |||
BN-S200 |
HRC45~68 |
Semi-finishing |
Hardened Steel, Superalloy |
Fine Finishing | |||
BN-H21 |
HRC62~68 |
Fine Finishing |
Hardened Steel |
BN-H10 |
HRC45~68 |
Fine Finishing |
Hardened Steel and High Strength Cast Iron |
BN-H20 |
HRC45~63 |
Fine Finishing |
Hardened Steel |
4.Image
5. FAQ
1. Are you a trading company or manufacturer ?
A: We are a manufacturer and wholesaler for diamond & CBN (cubic boron nitride) abrasives and tools.
2. How long is your delivery time?
A: Generally it is 3 -7 days.
2. Do you provide samples ? Is it free or extra ?
A: Normally we do not offer free samples, we could offer the sample for testing, but shipping fee is to be paid by customer as a company policy!
6. Packing
7.Contact us
If you have another question, pls feel free to contact us as below:
Contact us | |
Joanan@halnntools.com |
|
+86 17537165259 |
|
Skype |
Joanna Guo |
+86 17537165259 |
|
Send Inquiry to This Supplier
You May Also Like
-
Hard Part Turning 42CrMo4 Hardened Steel Materials Wind Power Bearings With Halnn DNGA160404-3S PCBN InsertsUS$ 20 - 30MOQ: 10 Pieces
-
BN-H21 PCBN Inserts Heavy Finish Interrupted Cutting Bearing Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
BN-H21 PCBN Inserts Finishing Heavy Interrupted Cutting 50Mn Materils Hardened Steel Wind Turbine BearingUS$ 20 - 30MOQ: 10 Pieces
-
High-speed Milling Hardened Steel Mold With BN-S20 SNGN CBN Turning Tool More High EfficiencyUS$ 20 - 30MOQ: 10 Pieces
-
Rough Milling Hardened Steel Mold With Solid CBN Cutting Tools Better Wear ResistanceUS$ 20 - 30MOQ: 10 Pieces
-
Hardened Steel Mold Finishing With High Quality CBN Cutting Insert FinishingUS$ 20 - 30MOQ: 10 Pieces
-
High-speed Machining CBN Inserts Mold With BN-S20 SNGN CBN Turning InsertsUS$ 20 - 30MOQ: 10 Pieces
-
Hardened Steel CBN Indexable Insert for Mold With BN-S20 Cubic Boron Carbide InsertsUS$ 20 - 30MOQ: 10 Pieces
-
Interrupt Cutting Bearing Steel Wind Power Bearings Materials With Halnn Tools CCGW09T304-2S CBN Turning InsertUS$ 20 - 30MOQ: 10 Pieces
-
Turning Instead of Grinding Hardened Steel Bearings With CCGW09T308-2S Brazing CBN Turning ToolsUS$ 20 - 30MOQ: 10 Pieces
