Contact Platform Support
Help CenterASTM D4290 Automotive Wheel Bearing Grease Leakage Tendencies Tester Under Accelerated Conditions
Product Spotlights
Related Products
-
ISO4406、NAS1638 Measurement of Oil Contamination Level Detection Online DeviceUS$ 2000 - 2800MOQ: 1 Set -
ASTM D5800 DIN51581Lubricant Evaporation Loss Measuring InstrumentUS$ 6000 - 11000MOQ: 1 Set
-
ASTM D3427 IP313 DIN51585 Measurement of the Ability of Lubricating Oil to Separate Atomized AirUS$ 2600 - 3000MOQ: 1 Set
-
ADDITION ASTM D1384 Automatic Unattended Antifreeze Corrosion TesterUS$ 5300MOQ: 1 Combo
-
ASTM D1881 Antifreeze Corrosion TesterUS$ 2500 - 3500MOQ: 1 Set
Automotive Wheel Bearing Grease Leakage Tendencies Tester Under Accelerated Conditions
Product model: JF25962
Product Introduction
This instrument is measuring a laboratory procedure for evaluating leakage tendencies of wheel bearing greases when tested under prescribed conditions.
Testing Principles: The test grease is distributed in a modified, automobile front wheel hub-spindle-bearings assembly. While the bearings are thrust-loaded to approximately 111N, the hub is rotated at 1000 rpm and the spindle temperature maintained at 160.0 °C ± 1.5 °C for 20 h. Leakage of grease or oil, or both, is measured, and the condition of the bearing surface is noted at the end of the test.
Technical Performance:
1. Applicable standards: ASTM D4290
2. Heating method: Heating by electric heating wire
3. Measuring range: Rt ~ 200 ℃
4. Temperature control method: PID digital temperature controller
5. Timing control: Digital timer, 0-99 hours
6. Load loading: Spring loaded
7. Overload protection: Current overload protector
8. Speed control: Speed displayed by digital display meter
of stepless speed regulation
9. Working power supply: AC220/240V, 50/60Hz
10. Engine power: 2000W
11. HS Code: 9027899090
Main Feature
1. Double compressor superposition refrigeration ensures the supply of cooling capacity;
2. The digital display shows the working time, and automatically stops the machine and gives an alarm after the test；
3. Stepless governor control speed 1000r/min, real-time digital display speed;
4. Spring compression loads the bearing load, with a loading force scale for easy operation;
5. Sliding high-temperature box door with safety protection device;
6. Microcomputer temperature controller, PT100 temperature sensor with high precision;
7. Overload protection device can delay 30s.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D217 Auto Cone Penetration of Lubricating Grease TesterUS$ 5800 - 6400MOQ: 1 Set
-
ASTM D3427 IP313 DIN51585 NFT60151 Air Release Properties of Hydrocarbon Based Oils TesterUS$ 3000 - 3300MOQ: 1 Set
-
ASTM D942 Automatic Oxidation Stability of Lubricating Greases TesterUS$ 9000 - 9800MOQ: 1 Set
-
ASTM D3336 Automatic Lubricating Greases in Ball Bearings at Elevated Temperatures TesterUS$ 56000 - 58000MOQ: 1 Set
-
ASTM D2603 Shear Stability of Polymer-Containing Oils Tester Ultrasonic MethodUS$ 9000 - 9800MOQ: 1 Set
-
ASTM E659 Autoignition Temperature of Liquid Chemicals TesterUS$ 4500 - 5000MOQ: 1 Set
-
ASTM D1092 Apparent Viscosity of Lubricating Greases TesterUS$ 32800 - 35000MOQ: 1 Set
-
ASTM D1742 Oil Separation From Lubricating Grease During Storage TesterUS$ 5400 - 5800MOQ: 1 Set
-
ASTM D6138 DIN51802 ISO 11007 Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions Tester (Emcor Test)US$ 9000 - 10000MOQ: 1 Set
-
ASTM D5481 Apparent Viscosity at High-Temperature and High-Shear Rate Tester (Multicell Capillary Viscometer)US$ 17200 - 18800MOQ: 1 Set
