Contact Platform Support
Help CenterASTM D3427 IP313 DIN51585 NFT60151 Air Release Properties of Hydrocarbon Based Oils Tester
Product Spotlights
Related Products
-
ASTM D942 Automatic Oxidation Stability of Lubricating Greases TesterUS$ 9000 - 9800MOQ: 1 Set -
ASTM D3336 Automatic Lubricating Greases in Ball Bearings at Elevated Temperatures TesterUS$ 56000 - 58000MOQ: 1 Set
-
ASTM D2603 Shear Stability of Polymer-Containing Oils Tester Ultrasonic MethodUS$ 9000 - 9800MOQ: 1 Set
-
ASTM E659 Autoignition Temperature of Liquid Chemicals TesterUS$ 4500 - 5000MOQ: 1 Set
-
ASTM D1092 Apparent Viscosity of Lubricating Greases TesterUS$ 32800 - 35000MOQ: 1 Set
Air Release Properties of Hydrocarbon Based Oils Tester
ASTM D3427
Product model: JF0308A
Introduction
This instrument is suitable for testing the ability of lubricating oil to separate mist air, such as gas turbine oil, hydraulic oil and other petroleum products. When using the instrument, the sample is heated to a certain temperature, and the sample is vigorously stirred by blowing excess compressed air into the sample, and the air forms small bubbles in the sample, that is, mist air. Record the time when the volume of mist air in the sample decreases to 0.2 % after the gas is stopped.
Technical parameter
1. Applicable standards: ASTM D3427, IP313, DIN51585, NFT60151, SH/T0308
2. Electricity source: AC220±10% 50Hz±5%
3. Heating method: Electric heating rod heating
4. Temperature control method: PID temperature controller
5. Temperature control range: Rt～80±1℃
6. Working pressure: 19.6Kpa
7. Pressure control: Precise pressure regulating valve adjustment
8. Timing method: Digital display timer
9. Pressure display: Digital meter display
10. Machine power: 1500W
11. Instrument size: 460*400*590mm
12. Net weight: 25KG
13. HS Code: 9027899090
Main feature
1. High-quality Omron PID thermostat, digital display temperature, accuracy 0.1℃
2. Digital display air pressure, with needle valve adjustment;
3. Automatically control the blowing time, and automatically record the defoaming time after
blowing, with an accuracy of 0.01s;
4. The press-type liquid circulation joint can quickly and conveniently disassemble the test tube;
5. Safety protection device to prevent the liquid level from being too low;
6. Two sets of constant temperature tests can be carried out at the same time;
7. The sputtering multi-channel liquid circulator can well ensure the temperature uniformity of each
point.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D1742 Oil Separation From Lubricating Grease During Storage TesterUS$ 5400 - 5800MOQ: 1 Set
-
ASTM D6138 DIN51802 ISO 11007 Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions Tester (Emcor Test)US$ 9000 - 10000MOQ: 1 Set
-
ASTM D5481 Apparent Viscosity at High-Temperature and High-Shear Rate Tester (Multicell Capillary Viscometer)US$ 17200 - 18800MOQ: 1 Set
-
ASTM D6082 High Temperature Foaming Characteristics of Lubricating Oils TesterUS$ 3800 - 4200MOQ: 1 Set
-
ASTM D5133 D7110 Gel Index of Lubricating Oil Tester ViscometerUS$ 40000 - 41800MOQ: 1 Set
-
ISO4406、NAS1638 Measurement of Oil Contamination Level Detection Online DeviceUS$ 2000 - 2800MOQ: 1 Set
-
ASTM D5800 DIN51581Lubricant Evaporation Loss Measuring InstrumentUS$ 6000 - 11000MOQ: 1 Set
-
ASTM D3427 IP313 DIN51585 Measurement of the Ability of Lubricating Oil to Separate Atomized AirUS$ 2600 - 3000MOQ: 1 Set
-
ADDITION ASTM D1384 Automatic Unattended Antifreeze Corrosion TesterUS$ 5300MOQ: 1 Combo
-
ASTM D1881 Antifreeze Corrosion TesterUS$ 2500 - 3500MOQ: 1 Set
