Contact Platform Support
Help CenterASTM D6138 DIN51802 ISO 11007 Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions Tester (Emcor Test)
Product Spotlights
Related Products
-
ASTM D5481 Apparent Viscosity at High-Temperature and High-Shear Rate Tester (Multicell Capillary Viscometer)US$ 17200 - 18800MOQ: 1 Set -
ASTM D6082 High Temperature Foaming Characteristics of Lubricating Oils TesterUS$ 3800 - 4200MOQ: 1 Set
-
ASTM D5133 D7110 Gel Index of Lubricating Oil Tester ViscometerUS$ 40000 - 41800MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity TesterUS$ 10000 - 11000MOQ: 1 Set
-
ASTM D2112 Automatic Lubricant Oxidation Stability Tester RPVOT Method--Oil Bath RBOTUS$ 8000 - 8200MOQ: 1 Set
Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions Tester (Emcor Test)
Product model: JF0700
Introduction
This instrument measures the ability of a grease to protect bearings against corrosion in the presence of water. Both sets of greased bearings were partially submerged in water and rotated at 80 rpm during the run and rest cycles. At the end of the test, check the bearing outer race for corrosion.
Product Parameter
1. Applicable standards: ASTM D6138, DIN51802, ISO 11007
2. Rotation mode: AC motor drive
3. Rotation speed: 80～85r/min
4. Timing method: Digital display timer
5. Stop, Start: Time can be set
6. Working unit: 8 units
7. Working power supply: 220V 50Hz
8. Power of the whole machine: 600W
9. Instrument size: 1420*320*240mm
10. Net weight: 46KG
11. HS Code: 9027899090
Main Feature
1. Matching standard test bearing, 30×72×19mm;
2. The mirror observation bearing without magnification function is convenient for operation;
3. High-torque motor, drive without hindrance;
4. Digital display working time and stop time;
5. After the test, the motor will be automatically turned off;
6. Fixed and dynamic tests can be carried out;
7. Special engineering plastic bearing seat to avoid other metal corrosion affecting the experimental results.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D217 Cone Penetration of Lubricating Grease TesterUS$ 1400 - 1500MOQ: 1 Set
-
ASTM D2266 D2596 D2783 D4172 Auto Lubricant Anti-Wear Performance Tester Four-Ball Wear Test MachineUS$ 15000 - 16000MOQ: 1 Set
-
ASTM D2265 ISO6299 Over Wide Temperature Range Dropping Point of Lubricating Grease TesterUS$ 1350 - 1400MOQ: 1 Set
-
ASTM D566 ISO2176 NFT60102 DIN51801 Automatic Dropping Point of Lubricating Grease TesterUS$ 7800 - 8500MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester 12 Test UnitsUS$ 28000 - 30000MOQ: 1 Set
-
ASTM D1401 Petroleum Oil and Synthetic Fluids Water Separability Tester Demulsibility Characteristics AnalyzerUS$ 2500 - 2800MOQ: 1 Set
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils TesterUS$ 3600 - 4200MOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils TesterUS$ 3500 - 3800MOQ: 1 Set
-
ASTM D3241 Auto Jet Fuel Thermal Oxidation Stability TesterUS$ 78000 - 86000MOQ: 1 Set
-
ASTM D665 Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water TesterUS$ 3500 - 3880MOQ: 1 Set
