Contact Platform Support
Help CenterASTM D1742 Oil Separation From Lubricating Grease During Storage Tester
Product Spotlights
Related Products
-
ASTM D6138 DIN51802 ISO 11007 Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions Tester (Emcor Test)US$ 9000 - 10000MOQ: 1 Set -
ASTM D5481 Apparent Viscosity at High-Temperature and High-Shear Rate Tester (Multicell Capillary Viscometer)US$ 17200 - 18800MOQ: 1 Set
-
ASTM D6082 High Temperature Foaming Characteristics of Lubricating Oils TesterUS$ 3800 - 4200MOQ: 1 Set
-
ASTM D5133 D7110 Gel Index of Lubricating Oil Tester ViscometerUS$ 40000 - 41800MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity TesterUS$ 10000 - 11000MOQ: 1 Set
Oil Separation from Lubricating Grease During Storage Tester
ASTM D1742
Product model: JF0682
Product Introduction
This instrument is designed and manufactured in accordance with the ASTM D1742 standard; it is used to measure the oil separation of grease with a consistency greater than No. 0 during storage. The test principle is as follows: put the grease on a 75μm filter screen, continue the test at 25℃±1℃ and 1.72kPa ± 0.07kPa air pressure for 24 hours, then weigh the quality of the oil separated and dropped into the oil container.
Technical Parameter
1. Applicable standard: ASTM D1742
2. Test unit: 2 units
3. Control temperature: 25℃±1℃
4. Pressure range: 1.72kPa±0.07kPa
5. Filter aperture: 75μm
6. Pressure display: Precision digital pressure gauge
7. Working power supply: AC220V 50HZ
8. Power of the whole machine: 1200W
9. Instrument size: 490*500*880mm
10. Net weight: 60KG
11. HS Code: 9027899090
Main Feature
1. The digital meter displays the pressure, and the results are clear at a glance.
2. High-precision needle valve control pressure.
Temperature display: digital display thermostat.
11. Sputtering vortex stirrer, to ensure the uniformity of the temperature field of the bath, and can carry out internal and external circulation;
Send Inquiry to This Supplier
You May Also Like
-
ASTM D2112 Automatic Lubricant Oxidation Stability Tester RPVOT Method--Oil Bath RBOTUS$ 8000 - 8200MOQ: 1 Set
-
ASTM D217 Cone Penetration of Lubricating Grease TesterUS$ 1400 - 1500MOQ: 1 Set
-
ASTM D2266 D2596 D2783 D4172 Auto Lubricant Anti-Wear Performance Tester Four-Ball Wear Test MachineUS$ 15000 - 16000MOQ: 1 Set
-
ASTM D2265 ISO6299 Over Wide Temperature Range Dropping Point of Lubricating Grease TesterUS$ 1350 - 1400MOQ: 1 Set
-
ASTM D566 ISO2176 NFT60102 DIN51801 Automatic Dropping Point of Lubricating Grease TesterUS$ 7800 - 8500MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester 12 Test UnitsUS$ 28000 - 30000MOQ: 1 Set
-
ASTM D1401 Petroleum Oil and Synthetic Fluids Water Separability Tester Demulsibility Characteristics AnalyzerUS$ 2500 - 2800MOQ: 1 Set
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils TesterUS$ 3600 - 4200MOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils TesterUS$ 3500 - 3800MOQ: 1 Set
-
ASTM D3241 Auto Jet Fuel Thermal Oxidation Stability TesterUS$ 78000 - 86000MOQ: 1 Set
