Contact Platform Support
Help Center40-inch Pressure Point pp Melt-blown Filter Element, Made of Polypropylene Fiber, Supplied by Jiashuo Environmental Protection
Related Products
-
20-inch pp Melt-blown Filter Element With Embossed, Needled and Grooved Surface, Large Dirt-holding Capacity, Supplied by Jiashuo Environmental ProtectionUS$ 1.23 - 1.54MOQ: 10 Pieces -
40-inch pp Grooved Filter Element With Surface Slots and High Dirt-holding Capacity, Supplied by Jiashuo Environmental ProtectionUS$ 2.77 - 3.08MOQ: 10 Pieces
-
Precision Filtration for Hydraulic Systems RFA-100*5F-Y Return Oil Filter Supplied by Jiashuo Environmental ProtectionUS$ 180 - 200MOQ: 1 Combo
-
Hfu640uy060j Pall High Flow Cartridge Filter for Security Filtration, Folded Water Filter Element, Jiashuo Environmental ProtectionUS$ 15.38 - 16.77MOQ: 10 Pieces
-
Stzx2-800*5q Magnetic Return Oil Filter for Hydraulic Oil Station, Jiasuo Environmental Protection AlternativeUS$ 40 - 44.62MOQ: 10 Pieces
40-inch Pressure Point PP Melt-blown Filter Element, Made of Polypropylene Fiber, Supplied by Henan Jiashuo Environmental Protection Technology Co., Ltd.
Product Introduction:
PP cotton melt-blown filter element (abbreviated as: melt-blown filter element) is a tubular filter element made of odorless polypropylene particles through heating and melting, spinning, drawing, and receiving and forming. If the raw material is mainly polypropylene, it can be called a PP melt-blown filter element. It is not only widely used in water purification but also has excellent chemical compatibility, suitable for filtering strong acids, strong alkalis, and organic solvents. It has strong dirt-holding capacity, long service life, and low cost.
Product Features:
Filter efficiency and filtration accuracy: The pore size density of the PP melt-blown filter element is uniform, and the filtration efficiency reaches over ***.
Low filtration resistance, large filtration flow, large dirt-holding capacity, and long service life. During the production process of the PP melt-blown filter element, the fiber diameter and gap can be adjusted. The inner layer of the filter element's micropores is small, and the outer layer is large, which increases the flow and dirt-holding capacity. The filter element is not easy to block, thus extending the service life.
It has high self-cleanliness, no pollution to water quality, and is resistant to acids, alkalis, and organic solvents and corrosion.
It has high strength. When the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa, the filter element will not deform. When the temperature exceeds 90°C, the filtration efficiency will not decrease.
After the polypropylene in this product is modified, it has extremely high hydrophilicity and can absorb ten times its own weight of water, so it can be used for oil-water separation.
Product Specifications:
Length: 10 inches, 20 inches, 30 inches, 40 inches
Accuracy: 1, 3, 5, 10, 20, 30, 60 (μm)
Applicable PH value: 1 - 13
Pressure difference: Forward 0.4Mpa.
Working temperature: Below 70°C at 0.25Mpa.
Sterilization: It can withstand 126°C for 30 minutes of online steam sterilization.
Endotoxin: The water extract of the filter column is tested by lAL, and the endotoxin content is less than 0.5EU/ml
Precautions:
Select the filter element according to the filtration accuracy of the liquid and the impurities it contains. For viscous liquids, secondary filtration can be used. The first stage is coarse filtration to reduce resistance and extend the service life of the filter element (generally 3 - 4 times).
Install the melt-blown filter element correctly. If the filtered water is found to be polluted, carefully check whether the filter element is skewed and whether the two ends are strictly aligned and tightened.
When the pressure difference reaches 0.2MPa, the filter element should be cleaned or replaced.
Send Inquiry to This Supplier
You May Also Like
-
Pfc8370r3ch83 Pall Oil Filter Interchangeable Hydraulic Oil Precision Filter Element, Jiashuo Environmental ProtectionUS$ 40 - 43.08MOQ: 10 Pieces
-
High-density Stainless Steel Screen, Conical Filter Element, Funnel-shaped Filter Screen, Supplied by Jiashuo Environmental ProtectionUS$ 8.46 - 11.54MOQ: 10 Pieces
-
2560404002 Dryer Air Compressor, Unites Gas-oil Separation Filter Element, Jiashuo Environmental ProtectionUS$ 44.62 - 52.31MOQ: 10 Pieces
-
R928006916 Main Tank Hydraulic Circulation Oil Filter, Replacement by Jiashuo Environmental ProtectionUS$ 31.54 - 35.38MOQ: 10 Pieces
-
V4051b7c10 Spindle of Engineering Machine, Vickers Fuel Filter Element, Jiashuo Environmental ProtectionUS$ 26.92 - 30MOQ: 10 Pieces
-
Srfa-630*10f-c/y Double-barrel Return Oil Filter, Liming Oil Filter, Jiasuo Environmental Protection AlternativeUS$ 123.08 - 130.77MOQ: 5 Sets
-
Tzx2-250*10w Oil Pump Inlet Liming Return Oil Filter, Produced by Jiashuo as a ReplacementUS$ 30.77 - 35.38MOQ: 10 Pieces
-
026w32831-000 Oil Filter Element for York Central Air Conditioning Refrigeration System, Replaced by Jiashuo Environmental ProtectionUS$ 26 - 30.62MOQ: 10 Pieces
-
531b0099h21 Refrigerator Air Compressor Oil Filter, Jiasuo Environmental Protection ReplacementUS$ 35.38 - 40MOQ: 10 Pieces
-
Nrsl-80 Dual Lubricating Oil Station High-pressure Pipeline Filter Element, Produced by Jiashuo Environmental ProtectionUS$ 44.62 - 50.77MOQ: 10 Pieces
