Aluminium Vessel for Drop Test of IEC 60335-2-3 21.102
IEC 60335-2-3 21.102. Hob surfaces of glass-ceramic or similar material shall withstand the stresses liable to occur in normal use.
Compliance is checked by the following test.
Heating sources beneath a surface of glass-ceramic or similar material are operated in accordance with the conditions of Clause 11 until steady conditions are established. After switching off, the hob surface is immediately subjected to the following test:
A vessel having a copper or aluminium base that is flat over a diameter of 220 mm ± 10 mm with edges rounded with a radius of at least 10 mm is uniformly filled with sand or shot so that the total mass is 4 kg. The vessel is dropped flat from a height of 150 mm onto the surface.
The test is carried out 10 times on any part of the hob surface but not within 20 mm of control knobs.
Send Inquiry to This Supplier
You May Also Like
-
Cold Bend Test Apparatus IEC 60811-1-4 Figure 1US$ 1500 - 1700MOQ: 1 Piece
-
2-in-1 Handheld Soil Moisture & Temperature Measuring TesterUS$ 288 - 350MOQ: 1 Piece
-
Soil Moisture & Temperature Measuring Tester 0-100%US$ 288 - 350MOQ: 1 Piece
-
IPX5/IPX6 Hose Nozzle Test Device to Verify Protection Against Water JetsUS$ 430 - 490MOQ: 1 Piece
-
IEC 62368-1:2028 Figure 49 Steel Disc Wireless Power Transmitters Foreign Object Temperature Rise Test KitNegotiableMOQ: 1 Combo
-
Adult Arm Probe IEC 62841-4-6:2024 19.101.3 Figure 105NegotiableMOQ: 1 Unit
-
Young Adult Arm Probe IEC 62841-4-6:2024 19.101.3 Figure 104NegotiableMOQ: 1 Unit
-
Jointed Test Probe of IEC 62368-1 Annex V Figure V.1NegotiableMOQ: 1 Unit
-
150W Laser Power Meter F150-DC-25P 240-2200nm D25mmNegotiableMOQ: 1 Combo
-
Terminal Probe of IEC 62368-1 Figure V.5 L=100mm&20mm D=1mmNegotiableMOQ: 1 Piece
