Contact Platform Support
Help CenterNon Contact Test Gauge BS1363-2 Figure 14 For Socket-outlet Checking
Related Products
-
IEC60598-1 Clause 4.26 Figure 29 Uninsulated Reverse Polarity SELV Component Accidental Short Circuit Protection Test ChainUS$ 200 - 220MOQ: 1 Piece -
IEC60695-2-10 Glow Wire Apparatus Replacement Glow Wire Loop Diameter 1mmUS$ 55 - 65MOQ: 1 Piece
-
7006-27B-1 Go Gauges for E40 and E27 Caps on Finished Lamps According to IEC60061US$ 325 - 350MOQ: 1 Piece
-
IEC60061 Not Go Gauges for E27 Caps on Finished Lamps 7006-28A-1US$ 250 - 280MOQ: 1 Piece
-
7006-50-1 Gauge for Finished Lamps Fitted With E27 Caps for Testing Contact MakingUS$ 325 - 360MOQ: 1 Piece
Noncontact Test Gauge BS1363-2 Figure 14 For Socket-outlet Checking
On insertion of a plug into a socket-outlet, the travel of the end of either current-carrying pin from the front face of the socket-outlet to the first point of contact with the appropriate socket contact, in any position the socket contacts may occupy, shall be not less than 9.6mm
Conformity shall be checked by inspection and the use of the gauge shown in Figure 14 and the circuit shown in Figure 13. Neither indicator shall light.
Figure NO: |
Description |
QTY.(piece) |
Figure 1 |
Test Pin with 5N force |
1 |
Figure 2a.2b |
Apparatus for mechanical strength test on resilient covers |
1 |
Figure 5 |
Gauge for plug pins |
1 |
Figure 6 |
Apparatus for testing plug cover fixing screws |
1 |
Figure 7 |
Mounting plate |
1 |
Figure8 |
Plug pin deflection test apparatus for resilient plugs |
1 |
Figure 10 |
Apparatus for pressure test at high temperatures |
1 |
Figure 11 max/min |
GO gauge for socket-outlet |
2 |
Figure 12 |
Contact test gauge |
1 |
Figure 14 |
Noncontact testgauge |
1 |
Figure 15 |
Turning moment gauge |
1 |
Figure 16a.16b |
withdrawal pull gauge for effectiveness of contact |
2 |
Figure 17a/17b |
Test apparatus for temperature rise test and the dummy front plate |
1 |
Figure 19 |
Solid link for test on fuse clips |
1 |
Figure 23 |
Apparatus for pressure test |
1 |
Figure 29 |
Calibration of calibrated link |
1 |
Figure 30 |
Test plug for temperature rise |
1 |
Send Inquiry to This Supplier
You May Also Like
-
7006-51A-2 Gauge for E27 Caps on Finished Lamps for Testing Port. Against Acc. Contact During InsertionUS$ 325 - 360MOQ: 1 Piece
-
7006-51-2 Gauge for Caps on Finished Lamps for Testing Port Against Accidental Contact E27 51*39mmUS$ 325 - 360MOQ: 1 Piece
-
7006-27C-1 Go Gauges for Dimension "S1" of E27 Caps on Finished LampsUS$ 325 - 360MOQ: 1 Piece
-
IEC 60884 Figure 30 Apparatus to Verify the Fixation of Pins in the Body of the PlugUS$ 450 - 500MOQ: 1 Set
-
BS1363 Figure 12 Contact Test Gauge for 13A Socket OutletsUS$ 310 - 330MOQ: 1 Set
-
IEC60529 IP2X Code 12mm Jointed Finger Probe BUS$ 160 - 180MOQ: 1 Piece
-
IEC61032 Figure 9 Simulate Screwdriver or Pointed Tool Short Pin Probe 13US$ 58 - 65MOQ: 1 Piece
-
IEC61032 Figure1 Sphere Ø50mm With Handle IP1X Test Probe AUS$ 130 - 150MOQ: 1 Piece
-
IEC60068-2-75 Six Energies 0.14J-1.0J Stainless Steel Shell Adjustable Spring Impact HammerUS$ 620 - 660MOQ: 1 Piece
-
IEC60068-2-75 Single Energy 0.14J Impact Test Spring Hammer Apparatus IK01 CodeUS$ 180 - 200MOQ: 1 Piece
