IEC61032 Figure 9 Simulate Screwdriver or Pointed Tool Short Pin Probe 13
Short Test pin Probe 13
1. Product overview:
The short test pin meets the requirements of IEC61032&IEC60335 standards, and is used to simulate screwdrivers and or similar pointed tools in the test. It is mainly used to check whether live parts in Class 0 equipment and Class II equipment are touched.
2. Technical parameters:
1. Probe diameter: head 3mm, tail 4mm
2. Probe length: 15mm
3. Diameter of baffle: 25mm
4. Thickness of baffle: 4mm
5. Reference standard: IEC61032: 1997 Figure 9
Sherry Xu
Tel:+86-0755-21518810
Email:sherryxu@jusdatest.com
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Figure 4 Imitate a Wire 1.0mm Rigid Test Probe D With 1N ForceUS$ 130 - 135MOQ: 1 Piece
-
IEC61032 Figure 16 Sharp Test Probe 41 For Glowing Heating PartUS$ 100 - 110MOQ: 1 Piece
-
IEC61032/IEC60529 Degrees of Protection IP10-IP40 Against Access to Hazardous Parts Test ProbeUS$ 625 - 635MOQ: 1 Set
-
IEC/UL 61032 IP1X-IP4X Code Standard Test Sphere Probe, Jointed Finger ProbeUS$ 550 - 560MOQ: 1 Set
-
IEC 60335 Protection Against Access to Live Parts Test Probe B, Test Probe 13, Test Probe 41US$ 305 - 318MOQ: 1 Set
-
IEC60335-2-24 Figure BB.1 Apparatus for Water Evaporation and for Accumulation of FrostUS$ 720 - 750MOQ: 1 Piece
-
IEC60529 Waterproof Test IPX3 and IPX4 Hand Held Spray NozzleUS$ 660 - 680MOQ: 1 Piece
-
IEC 60335 /IEC 60601 Ball Pressure Tester For Heat Resistance of Non-metallic MaterialsUS$ 168 - 175MOQ: 1 Set
-
IEC61032 Figure 12 8.6mm Jointed Children Finger Probe 18US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure 13 5.6mm Children Joint Finger Probe 19US$ 280 - 300MOQ: 1 Piece
