Contact Platform Support
Help CenterIEC60068-2-75 Single Energy 0.14J Impact Test Spring Hammer Apparatus IK01 Code
Related Products
-
IEC60068-2-75 IK02 Single Impact Force 0.2J Spring Impact HammerUS$ 180 - 200MOQ: 1 Piece -
IEC60068-2-75 With a 10N Release Force 0.35J Spring Impact HammerUS$ 180 - 200MOQ: 1 Piece
-
IEC60068-2-75 IK04 Level Stainless Steel Shell 0.5J Spring Impact HammerUS$ 180 - 200MOQ: 1 Piece
-
Single Energy 0.7J Impact Spring Hammer According to IEC60068-2-75 StandardUS$ 180 - 200MOQ: 1 Piece
-
IEC/EN 60950 and IEC/EN 61010 Diameter 50 mm Weight 500g Impact Test Steel BallUS$ 50 - 55MOQ: 1 Piece
0.14J Single energy Impact test Spring Hammer Apparatus
1. Product Explanation
Spring impact hammer is designed according to the IEC60068-2-75 for testing the resistance of impact of electrical and electronic products. Spring impact hammer is the necessary test probe to check the safety performance of enclosure of electrical products under the condition of external mechanical forces.
It is used for the mechanical robustness testing of domestic and similar electrical appliances, electronic products, such as lights, enclosure of electrical accessories, lever, handle, knobs, indicator lights, signal lights, lampshades and so on.
Spring impact hammer can make sure that the tested products can withstand the possibility of reckless operations and other accidents. The electrical appliances can run safe and reliable and won‘t cause harm to people.
Sherry Xu
Tel:+86-0755-21518810
Email:sherryxu@jusdatest.com
Send Inquiry to This Supplier
You May Also Like
-
UL1026/1278 Diameter 50.8mm Mass 535g Impact Test Steel Sphere With RingUS$ 55 - 60MOQ: 1 Piece
-
IEC60068-2-75 Six Energies 0.14J-1.0J Stainless Steel Shell Adjustable Spring Impact HammerUS$ 620 - 660MOQ: 1 Piece
-
IEC61032 IP10 Test Sphere 50mm Diameter With 50N ForceUS$ 180 - 200MOQ: 1 Piece
-
IEC61032 Figure 3 2.5mm Metal Rigid Test Rod C With 3N ForceUS$ 130 - 140MOQ: 1 Piece
-
IEC61032 Figure 3 IP3X Degree 2.5mm Test Probe CUS$ 105 - 115MOQ: 1 Piece
-
IEC60529 Suffit IP40 and D Code 1.0mm Test Probe DUS$ 105 - 115MOQ: 1 Piece
-
IEC61032 Figure 4 Imitate a Wire 1.0mm Rigid Test Probe D With 1N ForceUS$ 130 - 135MOQ: 1 Piece
-
IEC61032 Figure 16 Sharp Test Probe 41 For Glowing Heating PartUS$ 100 - 110MOQ: 1 Piece
-
IEC61032/IEC60529 Degrees of Protection IP10-IP40 Against Access to Hazardous Parts Test ProbeUS$ 625 - 635MOQ: 1 Set
-
IEC/UL 61032 IP1X-IP4X Code Standard Test Sphere Probe, Jointed Finger ProbeUS$ 550 - 560MOQ: 1 Set
