Home > Products > Other special additives > German Technical Background VOK-9051 Processing Aids It Has Release Performance Replaces BYK-9051
German Technical Background VOK-9051 Processing Aids It Has Release Performance Replaces BYK-9051
- Nansha port
- T/T
You May Like
-
German Technical Background VOK-P 9060 Processing Aids Stabilize Mixture and Improve Fluidity Replaces BYK-P 9060
-
German Technical Background VOK-P 9065 Processing Aids It Has Release Performance Replaces BYK-P 9065
-
German Technical Background VOK-P 9080 Processing Aids With Demoulding Performance Replaces BYK-P 9080
-
German Technical Background VOK-P 9085 Processing Aids It Has Good Release Performance Replaces BYK-P 9085
-
German Technical Background VOK-P 9902 Processing Aids Used to Improve Polyurethane Foam Replaces BYK-P 9902
-
German Technical Background VOK-P 9904 Processing Aids The Additive Can Accelerate the Emulsification of Foaming Agent and Polyether Polyol Replaces BYK-P 9904
Product Details
| Brand Name | vok specialty chemistry | Place of Origin | China | |
| Model Number | VOK-9051 | Type | Other, Processing aids | |
| Usage | Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals |
Product Description
German technical background VOK®- P 9051 Low viscosity processing aid for BMC/DMC with demoulding property.
Product Information
chemical composition
Mixture of surfactant and polymer
Typical Physicochemical Data
The data given in this data page are only typical values, not technical indicators of the product.
Acid value: 157 mg KOH/g
Density (20 ℃): 0.97 g/ml
Refractive index (20 ℃): 1.487
Non volatile matter (10 minutes, 150 ℃): 99%
Flash point:>100 ℃
application area
BMC, DMC
Features and Benefits
VOK®- P 9051 is a low viscosity processing aid with demoulding property for BMC/DMC, which will not produce fogging. Used in BMC lamp reflector to reduce product fog shadow. Because of its low viscosity, VOK®- P 9050 is easier to operate. VOK®- P 9051 is recommended only for BMC/DMC. Adjust the injection parameters if necessary.
Recommended dosage
3-4% (purchase form) is based on the total amount of resin.
The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.
Addition method and processing guidance
Add to UP resin while stirring. The traditional release agent used in the formula should be removed.
Contact Us
- Guangzhou Situyuan Chemical Co., Ltd
- Contact nameliaolijun Chat Now
- Phone86-020-29863024
- Address, Guangzhou, Guangdong, China
Product Categories
| Defoamer | Leveling agent | Wetting dispersant | Wetting agent |
| Other special additives |
New Products
-
German Technical Background VOK-P 9908 Processing Aids For Polyurethane System Replaces BYK-P 9908
-
German Technical Background VOK-P 9909 Compatizer Used in Polyurethane Systems Replaces BYK-P 9909
-
German Technical Background VOK-P 9912 Processing Aids The Additive Has Internal Demoulding Performance Replaces BYK-P 9912
-
German Technical Background VOK-C 8001 Coupling Agent Used in Epoxy Resin Systems Replaces BYK-C 8001
-
German Technical Background VOK-C 8002 Coupling Agent Used in Resin Systems Replaces BYK-C 8002
-
German Technical Background VOK-C 8003 Coupling Agent Used in Resin Systems Replaces BYK-C 8003
-
German Technical Background VOK-C 8013 Coupling Agent For Thermosetting Plastics Replaces BYK-C 8013
-
German Technical Background VOK-AP 4015 Viscosity Reducer Suitable for Use in No-fill and Low-fill Systems Replaces BYK-AP 4015
-
German Technical Background VOK-P 9915 Viscosity Reducer Improve the Fluidity of Reactive Blends Replaces BYK-P 9915
-
German Technical Background VOK-P 2710 Processing Aids Used in Solvent-free and Solvent Based Epoxy Resins Replaces BYK-P 2710
-
German Technical Background VOK-8820 Defoamer Used in Water-based Coatings and Printing Inks Replaces BYK-8820
-
German Technical Background VOK-155/35 Dispersant Agent For Pigment Dispersion Replaces BYK-155/35
-
German Technical Background VOK-3941 P Adhesion Promoter Used to Improve the Adhesion of Powder Coating Substrate Replaces BYK-3941 P
-
German Technical Background VOK-3942 P Adhesion Promoter Used to Improve the Wetting and Adhesion of Powder Coating Substrate Replaces BYK-3942 P
-
German Technical Background VOK-C 8014 Coupling Agent Used in Carbon Fiber Reinforced Radical Curing Systems Replaces BYK-C 8014
-
German Technical Background VOK-UV 3576 Surface Additive Improve Substrate Wetting and Leveling Replaces BYK-UV 3576
-
German Technical Background VOK-FL 358 N Surface Additives For Solvent Based Paint Systems Replaces BYK-FL 358 N
-
German Technical Background VOK-FL 3440 Surface Additives Can Reduce Surface Tension Replaces BYK-FL 3440
-
German Technical Background VOK-FL 3441 Surface Additives It Can Prevent Shrinkage and Pinhole Replaces BYK-FL 3441
-
German Technical Background VOK-FL 3560 Surface Additives Suitable for Aqueous Systems Replaces BYK-FL 3560
-
German Technical Background VOK-FL 3565 Surface Additives Applicable to Water-based Systems Replaces BYK-FL 3565
-
German Technical Background VOK-P WET 800N Wetting Agent Reduces Dynamic Surface Tension Replaces BYK-WET 800N
-
German Technical Background VOK-ETOL AQ Viscosity Reducer Oil Change Additives Used to Prevent Foaming and Bursting of Water-based Baking Paint System Replaces BYK-ETOL AQ
-
German Technical Background VOK-FL 3902P Leveling Agent For Powder Coatings Replaces BYK-FL 3902P
Popular Searches
Recommended Products
- Copper Complex Algaecide for Swimming & Spa Control Algae
- 39660-17-8 N,N-Dimethyl-2-hydroxypropylammonium Chloride Polymer) 60% PQ Algaecide
- 31075-24-8 Poly[oxyethylene(dimethylimino) Ethylene(dimethylimino) Ethylene Dichloride] Pool Algaecide WSCP
- Swimming Pool /spa Phosphate Out / Phosphate Remover
- Fish Pond Algaecide for Koi Fish Ponds/Tank Polyquaternium-42 Algae Removal Chemicals Cleaning Care 31512-74-0
- Cosmocil CQ /Polihexanide HCl/ Polihexanidum/ PHMB /Polyhexamethylene Biguanide Hydrochloride 20% CAS No. 32289-58-0
- 68555-36-2 Mirapol WT PUB 62% Polyquaternium-2 Zinc Intermediates Electroplating Plating Agent
- Pool Chelated Copper Compounds Algaecide Long Lasting Winter Closing Chemicals Control Blue-Green Algae
- Algae Control Freshwater Saltwater Aquariums Algaecide Qac 60 CAS 31512-74-0 Safe for Fish
- CAS: 77-09-8 Phenolphthalein Powder Acid-Base Indicator 25KG/Drum
- 39660-17-8 Disinfectant Pool Cleaning No Chlorine Chemicals Algaecide PQ APCA 60% Customized Package and Label
- Poly (dimethyl Amine-co-epichlorohydrin) 60% CAS 25988-97-0 APCA Algaecide Copper Free Fomaless PQ Algicide
Find Similar Products By Category
- Chemicals > Chemical Auxiliary & Catalyst > Chemical Auxiliary
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
liaolijun
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile






German Technical Background VOK-P 9060 Processing Aids Stabilize Mixture and Improve Fluidity Replaces BYK-P 9060
German Technical Background VOK-P 9065 Processing Aids It Has Release Performance Replaces BYK-P 9065
German Technical Background VOK-P 9080 Processing Aids With Demoulding Performance Replaces BYK-P 9080
German Technical Background VOK-P 9085 Processing Aids It Has Good Release Performance Replaces BYK-P 9085
German Technical Background VOK-P 9902 Processing Aids Used to Improve Polyurethane Foam Replaces BYK-P 9902
German Technical Background VOK-P 9904 Processing Aids The Additive Can Accelerate the Emulsification of Foaming Agent and Polyether Polyol Replaces BYK-P 9904





German Technical Background VOK-P 9908 Processing Aids For Polyurethane System Replaces BYK-P 9908
German Technical Background VOK-P 9909 Compatizer Used in Polyurethane Systems Replaces BYK-P 9909
German Technical Background VOK-P 9912 Processing Aids The Additive Has Internal Demoulding Performance Replaces BYK-P 9912
German Technical Background VOK-C 8001 Coupling Agent Used in Epoxy Resin Systems Replaces BYK-C 8001
German Technical Background VOK-C 8002 Coupling Agent Used in Resin Systems Replaces BYK-C 8002
German Technical Background VOK-C 8003 Coupling Agent Used in Resin Systems Replaces BYK-C 8003
German Technical Background VOK-P 9915 Viscosity Reducer Improve the Fluidity of Reactive Blends Replaces BYK-P 9915
German Technical Background VOK-P 2710 Processing Aids Used in Solvent-free and Solvent Based Epoxy Resins Replaces BYK-P 2710
German Technical Background VOK-8820 Defoamer Used in Water-based Coatings and Printing Inks Replaces BYK-8820
German Technical Background VOK-3941 P Adhesion Promoter Used to Improve the Adhesion of Powder Coating Substrate Replaces BYK-3941 P
German Technical Background VOK-3942 P Adhesion Promoter Used to Improve the Wetting and Adhesion of Powder Coating Substrate Replaces BYK-3942 P
German Technical Background VOK-C 8014 Coupling Agent Used in Carbon Fiber Reinforced Radical Curing Systems Replaces BYK-C 8014
German Technical Background VOK-UV 3576 Surface Additive Improve Substrate Wetting and Leveling Replaces BYK-UV 3576
German Technical Background VOK-FL 358 N Surface Additives For Solvent Based Paint Systems Replaces BYK-FL 358 N
German Technical Background VOK-FL 3440 Surface Additives Can Reduce Surface Tension Replaces BYK-FL 3440
German Technical Background VOK-ETOL AQ Viscosity Reducer Oil Change Additives Used to Prevent Foaming and Bursting of Water-based Baking Paint System Replaces BYK-ETOL AQ