Home > Products > Other special additives > German technical background VOK-FL 3440 Surface additives Can reduce surface tension replaces BYK-FL 3440
German technical background VOK-FL 3440 Surface additives Can reduce surface tension replaces BYK-FL 3440
- 100000 Kilogram / Kilograms per Month
- Nansha port
- T/T
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Protecting Products
- SIlica Gel Desiccant Fine Pore for Drying Flowers Moisture Damage
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Suppliers
- Hengyuan OEM production regenerating silica gel desiccant
- silica gel absorbent capacity in bags moisture absorbent
- 10 grams silica gel in bags moisture absorbent
Product Details
Brand Name: | vok specialty chemistry | Place of Origin: | China | Model Number: | VOK-FL 3440 |
Type: | Other, Surface additives | Usage: | Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals |
Product Description
German technical background VOK®- FL 3440 surface additive
Used in solvent, solvent-free and water-based systems to reduce surface tension. Good substrate wettability. It does not affect the smoothness of the surface.
Product Information
Chemical composition: acrylate copolymer solution
Typical Physicochemical Data
The data given in this data page are only typical values, not technical indicators of the product.
Density (20 ℃): 0.97 g/ml
Non volatile matter (10 minutes, 150 ℃): 10%
Solvent: dipropylene glycol monomethyl ether
Flash point: 84 ℃
Storage and transportation
When the temperature is lower than 25 ℃, the product may be separated or become turbid. Heat to 30-40 ℃ and disperse evenly
Special precautions: The additive contains C fluorotelomere, which replaces VOK ®- FL 340。
application area
Coating industry
Product features and advantages
VOK®- FL 3440 reduces the surface tension of the paint system, so it is an auxiliary for wetting the substrate to avoid shrinkage. It is especially suitable for solvent based, solvent-free and water-based paint systems. In the pure aqueous lotion system (without organic solvent), there is no fluorine substitute VOK®- FL 3455 and VOK®- FL 349 shall be used preferentially.
Recommended dosage
0.1-0.5% auxiliary dosage (supply form) is based on the general formula - up to 1% in special cases.
The above recommended dosage is for reference
Good addition amount shall be determined through a series of tests.
Contact Us
- Guangzhou Situyuan Chemical Co., Ltd
- Contact nameliaolijun
- Phone86-020-29863024
- AddressPanyu District Guangzhou,Guangdong
Defoamer | Leveling agent | Wetting dispersant | Wetting agent |
Other special additives |
- molecular sieve 5A zeolite adsorbent for PSA nitrogen separation
- 4A molecular sieves adsorbents for ethanol distallation and dehydration
- zeolite 5A molecular sieves desiccants for liquid coatings drying and dehydrating
- 13X molecular sieves adsorbents for nitrogen adsorption and hydrogen separation
- oxygen lithium molecular sieves adsorbents for nitrogen and oxygen separation
- Chemical Auxiliary Agent C6H11NaO7 Sodium Gluconate CAS 527-07-1
- lithium molecular sieve oxygen zeolite adsorbents for PSA nitrogen separation
- lithium molecular sieves adsorbents for nitrogen oxygen separation oxygen generators
- 13X-APG molecular sieves zeolite for natural gas purification and removal of co2 and h2s
- 13X-HP molecular sieves zeolite for PSA nitrogen gas deep separation adsorption
- 5A zeolite molecular sieves for liquid paints deep drying and purification
- zeolite 5A molecular sieves adsorbents for PSA nitrogen separation and purification
- zeolite 13X molecular sieves for liquid petroleum gas drying and removal of odor and h2s
- Zeolite 4A molecular sieves for liquid coats and paints deep dehydrating
- lithium molecular sieves for PSA nitrogen and oxygen adsorption separation
- oxygen molecular sieve 13X-HP for PSA nitrogen and oxygen air separation purification
- HAISU MAX 96-well Plate, 5 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 2 mg Sorbent per Well,Detachable , 30 µm, 2/pk
- HAISU MAX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MAX 96-well Plate, 60 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 2 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 10 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 20 mg Sorbent per Well, 30 µm, 2/pk
- HAISU MCX 96-well Plate, 30 mg Sorbent per Well, 30 µm, 2/pk
Popular Searches
- caustic soda flake
- sodium hydroxide
- caustic soda
- chelate agent
- Activated Carbon
- activated charcoal
- active carbon
- anthracite filter media
- Granular Activated Carbon
- Coconut Shell Activated Carbon
- Powder Activated Carbon
- Nut Shell Activated Carbon
- Honeycomb Activated Carbon
- Coal Activated Carbon
- Wood Activated Carbon
- Activated Charcoal Carbon
Find Similar Products By Category
- Chemicals > Catalysts & Chemical Auxiliary Agents > Chemical Auxiliary Agent
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
liaolijun
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-