Contact Platform Support
Help CenterGerman Technical Background VOK-C 8003 Coupling Agent Used in Resin Systems Replaces BYK-C 8003
Related Products
-
German Technical Background VOK-C 8013 Coupling Agent For Thermosetting Plastics Replaces BYK-C 8013CNY 140 - 180MOQ: 25 Kilograms -
German Technical Background VOK-AP 4015 Viscosity Reducer Suitable for Use in No-fill and Low-fill Systems Replaces BYK-AP 4015CNY 140 - 180MOQ: 25 Kilograms
-
German Technical Background VOK-P 9915 Viscosity Reducer Improve the Fluidity of Reactive Blends Replaces BYK-P 9915CNY 140 - 180MOQ: 25 Kilograms
-
German Technical Background VOK-P 2710 Processing Aids Used in Solvent-free and Solvent Based Epoxy Resins Replaces BYK-P 2710CNY 140 - 180MOQ: 25 Kilograms
-
German Technical Background VOK-3941 P Adhesion Promoter Used to Improve the Adhesion of Powder Coating Substrate Replaces BYK-3941 PCNY 180 - 210MOQ: 25 Kilograms
German technical background VOK®- C 8003 Coupling agent
Reactive polymer coupling agent for improving glass fiber reinforced composite of free radical initiated unsaturated resin and vinyl resin
Mechanical properties of composite materials.
Product Data
chemical composition
A mixture of surfactants.
Typical Physicochemical Data
The data given in this data page are only typical values, not technical indicators of the product.
Acid value: 0.98 g/ml
Density (20 ° C): 0.98 g/ml
Flash point: 24 ° C
Storage and transportation
Do not store and transport at a temperature higher than 40 ° C. It is sensitive to humidity. Please seal it immediately after use.
application
Thermoset
Features and benefits
VOK®- C 8003 is specially developed to improve the glass fiber composites of unsaturated resin and vinyl resin initiated by free radicals. The additive improves the mechanical properties of the product by improving the combination of glass fiber. The extent of improvement is related to the selection of glass fiber and resin system.
Recommended dosage
1-3% additives are based on the general formula.
The above recommended dosage is for reference only, and good dosage shall be determined through a series of tests.
Addition method and processing guidance
The additive must be added to the resin in a short time before curing. After adding, the resin must be used within 24 hours. The storage time varies according to the type of resin and the amount of additives.
Send Inquiry to This Supplier
You May Also Like
-
German Technical Background VOK-3942 P Adhesion Promoter Used to Improve the Wetting and Adhesion of Powder Coating Substrate Replaces BYK-3942 PCNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-C 8014 Coupling Agent Used in Carbon Fiber Reinforced Radical Curing Systems Replaces BYK-C 8014CNY 140 - 180MOQ: 25 Kilograms
-
German Technical Background VOK-UV 3576 Surface Additive Improve Substrate Wetting and Leveling Replaces BYK-UV 3576CNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 358 N Surface Additives For Solvent Based Paint Systems Replaces BYK-FL 358 NCNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 3440 Surface Additives Can Reduce Surface Tension Replaces BYK-FL 3440CNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 3441 Surface Additives It Can Prevent Shrinkage and Pinhole Replaces BYK-FL 3441CNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 3560 Surface Additives Suitable for Aqueous Systems Replaces BYK-FL 3560CNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 3565 Surface Additives Applicable to Water-based Systems Replaces BYK-FL 3565CNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-ETOL AQ Viscosity Reducer Oil Change Additives Used to Prevent Foaming and Bursting of Water-based Baking Paint System Replaces BYK-ETOL AQCNY 180 - 210MOQ: 25 Kilograms
-
German Technical Background VOK-FL 3931P Synergist It Has Good Shrinkage Resistance Replaces BYK-FL 3931PCNY 220 - 300MOQ: 25 Kilograms
