Contact Platform Support
Help CenterIEC 60335 /IEC 60601 Ball Pressure Tester For Heat Resistance of Non-metallic Materials
Related Products
-
IEC61032 Figure 12 8.6mm Jointed Children Finger Probe 18US$ 280 - 300MOQ: 1 Piece -
IEC61032 Figure 13 5.6mm Children Joint Finger Probe 19US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure7 ∅12 mm Jointless Rigid Finger Probe 11US$ 145 - 160MOQ: 1 Piece
-
IEC60065, IEC61032 Rigid Finger Probe 11 With 0-75N ForceUS$ 186 - 198MOQ: 1 Piece
-
IEC/EN 60335 Access Probe 11 With Force Scale From 0-50 NUS$ 182 - 195MOQ: 1 Piece
Overview
This device is designed and manufactured according to the IEC60335、IEC61010 standards clauses of the ball pressure test, and is a special instrument used to test the heat resistance of non-metallic materials. It is suitable for heat resistance test of non-metallic materials such as electrical equipment and its components and parts, non-ceramic solid electrical insulating materials.
Technical Parameter
Loadweight |
20N±0.2N |
Sphere |
R2.5mm |
Material |
304 stainless steel |
Pillar |
Ф50X100 Ф2.5X25 |
Standard |
IEC60335、IEC60601、IEC60950、IEC61010 |
||
Balance check:
Put the pressure ball on the support, adjust the position of the load body according to its swing, then tighten the load body, put the pressure ball on the support again, and observe its swing to determine the adjustment effect. Only in the case of balance, the pressure ball can be placed smoothly, otherwise the pressure ball will swing obviously, if it is detected by optical equipment, it will seriously affect the accuracy of the test results.
Sherry Xu
Tel:+86-0755-21518810
Email:sherryxu@jusdatest.com
Send Inquiry to This Supplier
You May Also Like
-
IEC/EN 60335-1 Figure 7 With 0-50N Force Test FingernailUS$ 220 - 230MOQ: 1 Piece
-
IEC60065 Figure 4 Stainless Steel Bent at an Angle of 90 Degree Test Hook ProbeUS$ 63 - 68MOQ: 1 Piece
-
IEC61032 Figure 8 Length 50mm Long Test Pin Probe 12 Similar as Pointed ObjectUS$ 75 - 80MOQ: 1 Piece
-
IEC60884 Figure 10 Socket-outlets Shutters With 1N Force Steel Rigid Wire ProbeUS$ 185 - 190MOQ: 1 Piece
-
IEC60884 Figure 9 Steel Rigid Wire With 20N Force Probe for Socket ShuttersUS$ 185 - 198MOQ: 1 Piece
-
IEC60065 Openings of the Enclosure 4mm Test ProbeUS$ 100 - 105MOQ: 1 Piece
-
IEC61010 Access to Preset Controls 3mm Test ProbeUS$ 100 - 105MOQ: 1 Piece
-
IEC60335-2-14 Clause 20.102 Handheld Blenders Blade 8mm Test Probe With HandleUS$ 116 - 125MOQ: 1 Piece
-
IEC60950 Figure 2C, IEC60065 12mm Telecom Test ProbeUS$ 145 - 152MOQ: 1 Piece
-
IEC61032 Figure 14 Grinding Test Probe 31 Access to Hazardous PartsUS$ 140 - 150MOQ: 1 Piece
