Home > Products > IC > TLE6209R motor/motion/ignition controller and driver Infineon original off the shelf

Share|

TLE6209R motor/motion/ignition controller and driver Infineon original off the shelf

Name: TLE6209R motor/motion/ignition controller and driver Infineon original off the shelf
Brand: Infineon
Price: Negotiable

FOB Price

Negotiable / Piece

1 Piece(Min.Order)

Supply Ability 2450 Piece / Pieces per Month

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Details

Brand Name:	Infineon	Place of Origin:	Aland Islands	Model Number:	TLE6209R
Type:	Drive IC	Package:	2450	D/C:	21+

Product Description

Functional Description

The TLE 6209 R is an integrated power H-Bridge with D-MOS output stages for driving

bidirectional loads such as DC-Motors. The design is based on Infineons Smart Power

Technology SPT which allows bipolar, CMOS and power D-MOS devices on the same

monolithic circuit.

Operation modes forward (cw), reverse (ccw) and brake are invoked by two control pins

PWM and DIR. Protection and a reliable diagnosis of overcurrent, openload, short-circuit

to ground, to the supply voltage or across the load are integrated. Detailed diagnostic

information is given via the 8 bit SPI status word. An integrated chopper current limitation

limits the current e.g. to reduce power dissipation during mechanical block of a DC

motor. Several device parameters can be set by the SPI control word. A three-level

temperature monitoring with prewarning, warning and shutdown is included for

controlled operation under critical power loss conditions. The full protection and

diagnosis capability make the device suitable especially for safety relevant applications,

e.g. in automotive ECUs.

Features

• Delivers up to 6 A continuous and 7 A peak current
• Optimized for DC motor management applications
• Very low RDS ON of typ. 150 mΩ @ 25 °C per switch
• Operates at supply voltages of up to 40V
• Overvoltage Protection against transients up to 45 V
• Outputs fully short circuit protected
• Standard SPI-Interface, daisy chain capability
• Adjustable chopper current regulation of up to 7 A
• Temperature monitor with prewarning, warning and shutdown
• Over- and Undervoltage-Lockout
• Open load detection
• Detailed load failure diagnosis by SPI
• Minimized power dissipation due to active free-wheeling
• Low EMI due to voltage slope regulation
• Very low current consumption (typ. 20 μA @ 25 °C) in stand-by (Inhibit) mode
• Enhanced power PG-DSO-Package
• Green Product (RoHS compliant)