IEC61032 Figure 4 Imitate a Wire 1.0mm Rigid Test Probe D With 1N Force
IEC61032 Figure 4 Imitate a Wire 1.0mm Rigid Test Probe D With 1N Force
Basic Introduction:
1.According to: IEC61032:1997/IEC60529:2001 AND UL
2.IP4X Test Probe D ( Test Probe D) is a necessary appliance for domestic and similar electrical appliance of against electric shock protection test.
Technical parameters
1.Test Probe Length :100mm
2. Test Probe Diameter:1.0mm
3.Dam- sphere Diameter:35mm
4.Handle Diameter:10mm
5.Handle Length 100mm
6. According to IEC61032 figure 4 (the Test probe D)
Sherry Xu
Tel:+86-0755-21518810
Email:sherryxu@jusdatest.com
Send Inquiry to This Supplier
You May Also Like
-
IEC60529 Waterproof Test IPX3 and IPX4 Hand Held Spray NozzleUS$ 660 - 680MOQ: 1 Piece
-
IEC 60335 /IEC 60601 Ball Pressure Tester For Heat Resistance of Non-metallic MaterialsUS$ 168 - 175MOQ: 1 Set
-
IEC61032 Figure 12 8.6mm Jointed Children Finger Probe 18US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure 13 5.6mm Children Joint Finger Probe 19US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure7 ∅12 mm Jointless Rigid Finger Probe 11US$ 145 - 160MOQ: 1 Piece
-
IEC60065, IEC61032 Rigid Finger Probe 11 With 0-75N ForceUS$ 186 - 198MOQ: 1 Piece
-
IEC/EN 60335 Access Probe 11 With Force Scale From 0-50 NUS$ 182 - 195MOQ: 1 Piece
-
IEC/EN 60335-1 Figure 7 With 0-50N Force Test FingernailUS$ 220 - 230MOQ: 1 Piece
-
IEC60065 Figure 4 Stainless Steel Bent at an Angle of 90 Degree Test Hook ProbeUS$ 63 - 68MOQ: 1 Piece
-
IEC61032 Figure 8 Length 50mm Long Test Pin Probe 12 Similar as Pointed ObjectUS$ 75 - 80MOQ: 1 Piece

