IEC61032 Figure 3 2.5mm Metal Rigid Test Rod C With 3N Force
IP3X Test Probe C(Test Tool C)
1. Product overview:
The test probe C meets the requirements of IEC 60529 & IEC61032 standards. It is used to simulate tools and metal wires in the IP protection test. It is mainly used for the test of the first characteristic number 3 and the additional letter C of the IP protection level test.
In the test requirements for preventing access to dangerous parts, the test probe C needs to have a thrust of 3±0.3N
2. Technical parameters:
1. Probe length: 100mm
2. Probe diameter: 2.5mm
3. Ball diameter: 35mm
4. Handle diameter: 10mm
5. Handle length: 100mm
6. According to IEC61032 Figure 3 (Test probe C), IEC60529
Sherry Xu
Tel:+86-0755-21518810
Email:sherryxu@jusdatest.com
Send Inquiry to This Supplier
You May Also Like
-
IEC/UL 61032 IP1X-IP4X Code Standard Test Sphere Probe, Jointed Finger ProbeUS$ 550 - 560MOQ: 1 Set
-
IEC 60335 Protection Against Access to Live Parts Test Probe B, Test Probe 13, Test Probe 41US$ 305 - 318MOQ: 1 Set
-
IEC60335-2-24 Figure BB.1 Apparatus for Water Evaporation and for Accumulation of FrostUS$ 720 - 750MOQ: 1 Piece
-
IEC60529 Waterproof Test IPX3 and IPX4 Hand Held Spray NozzleUS$ 660 - 680MOQ: 1 Piece
-
IEC 60335 /IEC 60601 Ball Pressure Tester For Heat Resistance of Non-metallic MaterialsUS$ 168 - 175MOQ: 1 Set
-
IEC61032 Figure 12 8.6mm Jointed Children Finger Probe 18US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure 13 5.6mm Children Joint Finger Probe 19US$ 280 - 300MOQ: 1 Piece
-
IEC61032 Figure7 ∅12 mm Jointless Rigid Finger Probe 11US$ 145 - 160MOQ: 1 Piece
-
IEC60065, IEC61032 Rigid Finger Probe 11 With 0-75N ForceUS$ 186 - 198MOQ: 1 Piece
-
IEC/EN 60335 Access Probe 11 With Force Scale From 0-50 NUS$ 182 - 195MOQ: 1 Piece

