ICS TRIPLEX T8403

Brand: ICS TRIPLEX

Type: T8403

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

the FPGA is inverted before it is used by the logic. This parameter affects the sense of the InhibitCCW I/O input. The following describes the different values for this parameter. 0 - Normal 1 - Invert Dinp4Pol Invert or Normal This parameter selects the polarity of the Dinp4. When this parameter is set, the input to the FPGA is inverted before it is used by the logic. This parameter affects the sense of the MSInp1 I/O input. The following describes the different values for this parameter. 0 - Normal 1 - Invert DM1Map/DM2Map See Chart Selects the variable sent to DACMon1, DACMon2 analog output pins on Command I/O connector J4. The DACMon1/2 output pins have a ± 2.0 V range centered around a 2.5 V bias, that is the output varies from 0.5 to 4.5 V and is 2.5 V when the selected DAC signal is zero. NOTE These DAC outputs are not clamped at maximum analog range. When the signal reaches maximum analog output, further signal increases cause it to wrap around to the opposite range extreme. DM1Map: DM2Map: Parameter Value Velocity mode Parameter Value Torque mode Definition VBus 380 * VBusScale V/V - Bus voltage. CmdIn 9155 rpm/V CmdIn 0.8474 * DIpeak/V Command. IFB 0.8474 * DIpeak/V - Torque current. VelFB 1144 rpm/V - Velocity. I2TFilt0.7152* (DIpeak2 ) A2 /V - I*I*t filtered value. VU 812 * VBusScale /V - U phase l-n voltage command. VqCmd 134.5 * VbusScale /V - Torque voltage command. ICMD 0.8474 * DIpeak ARMS /V - Torque Current command. Model Dependent Scale Factors Model User DIpeak ARMS VBusScale Relative x Description S20250 4.5 1 240 VAC 4.5 ARMS peak Parameter Value Definition VelErr 286 rpm/V Velocity error.

 PosFB 0.25 rev/V Position big bits. IdFB 0.8474 * DIpeak ARMS /V Non-torque current. VelFB 2288 rpm/V Velocity little bits. VelFB 9155 rpm/V Velocity big bits. PosErr 0.0625 Rev/V Position loop position error. VdCmd 134.5 * VBusScale/V Quadrature voltage command. PosFB 244.1e-6 rev/V Position little bits.