ICS TRIPLEX T9100@G2 9100

Brand: ICS TRIPLEX

Type:T9100@G2 9100

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

• 1200 g (2.6 lb) (package PM861K01). • 2800 g (6.1 lb) (package PM861K02). Dimensions W 119 x H 186 x D 135 mm (4.7 x 7.3 x 5.3 in) Width is measured along the DIN-rail, depth from the wall, and height vertically, including lock mechanism.

Communication Ports and Interfaces Technical data for communication ports and interfaces is described in Table 49 on page 241. Battery The memory content is backed up with either an internal or external battery unit (SB821). For back-up time see e Table 57 on page 253. Weight • 1200 g (2.6 lb) (package PM861K01). • 2800 g (6.1 lb) (package PM861K02). Dimensions W 119 x H 186 x D 135 mm (4.7 x 7.3 x 5.3 in) Width is measured along the DIN-rail, depth from the wall, and height vertically, including lock mechanism. The figures in Table 57 on page 253 are valid if the batteries have been installed after a normal CPU power-up, allowing for the memory back-up function to be activated.Electro-magnetic Compatibility and Electrical Safety PM861/TP830 meets the requirements specified in EMC Directive 89/336/EEC. For more information regarding electrical safety, see Appendix D, Directive Considerations. LED Indicators See Table 20 on page 179. Performance Data The PM861 processor unit, in single configuration, has the same performance data as the PM860. In redundant configuration the execution performance is somewhat lower than in single configuration. Switch over time from Primary CPU to Backup CPU, in redundant CPU configuration, is less than 10 ms.

Key Features • MPC862 Microprocessor running at 96 MHz. • 32 MB RAM with internal or external battery back-up facility. • 12 x S800 I/O units can be connected to the electrical ModuleBus. • Four on-board communication ports: – CN1 + CN2, Ethernet ports (IEEE 802.3, 10BaseT) – COM3, serial port (RS-232C) with modem support – COM4, serial port (RS-232C) for service tool • Basic communication is extendable by using additional communication interface units. • Redundancy Control Link, for use in redundancy configuration. • Compact Flash interface which supports loading of application and cold retain data storage.